Do you have a question about the CMEPW1900 and is the answer not in the manual?
Questions and answers
thomas mrizek
April 5, 2025
I was using the presser washer just fine and then it tripped breaker and would not turn back on. Is it overheated? what to do?
1 comments:
Mr. Anderson
May 14, 2025
If the Craftsman CMEPW1900 pressure washer tripped the breaker and will not turn back on, follow these steps:
1. Verify that the power supply voltage meets the minimum requirement. 2. Ensure the pressure washer is the only device on the circuit. 3. Do not use an extension cord; plug the unit directly into a wall outlet. 4. If the unit was not used for a long time, contact CRAFTSMAN customer service.
This answer is automatically generated
Ken
May 8, 2025
Hi, I just purchased a Craftsman CMEPW1900VA pressure washer with a CMZPWHPSB200 High Pressure Soap Bottle attachment option. Nowhere can I find when you use the high-pressure bottle instead of the regular soap tank option on the unit itself. Secondly, is there a switch anywhere on the unit which will switch you from regular spray over to the soap tank sprayer? I have downloaded operating manuals for the main unit, the high-pressure soap bottle unit and find nothing that answers my questions. Your help would be greatly appreciated.
Thanks!
Need help?
Do you have a question about the CMEPW1900 and is the answer not in the manual?
Questions and answers
I was using the presser washer just fine and then it tripped breaker and would not turn back on. Is it overheated? what to do?
If the Craftsman CMEPW1900 pressure washer tripped the breaker and will not turn back on, follow these steps:
1. Verify that the power supply voltage meets the minimum requirement.
2. Ensure the pressure washer is the only device on the circuit.
3. Do not use an extension cord; plug the unit directly into a wall outlet.
4. If the unit was not used for a long time, contact CRAFTSMAN customer service.
This answer is automatically generated
Hi, I just purchased a Craftsman CMEPW1900VA pressure washer with a CMZPWHPSB200 High Pressure Soap Bottle attachment option. Nowhere can I find when you use the high-pressure bottle instead of the regular soap tank option on the unit itself. Secondly, is there a switch anywhere on the unit which will switch you from regular spray over to the soap tank sprayer? I have downloaded operating manuals for the main unit, the high-pressure soap bottle unit and find nothing that answers my questions. Your help would be greatly appreciated. Thanks!