Wipe Protection; Automatic Safety Cut-Out - Siemens EX901LVV1E User Manual

Table of Contents

Advertisement

kWipe protection
I f you wipe over the control panel while the hob is
W i p e p r o t e c t i o n
switched on, settings may be altered. To avoid doing
this, you can use the hob's "Lock control panel for
cleaning" function.
To activate: Touch the
Ñ
sounds. The control panel is locked for 35 seconds.
You can now wipe over the surface of the control panel
without altering any settings.
To deactivate: The control panel will be unlocked once
35 seconds have elapsed. To release the function early,
touch the
Ñ
symbol.
Notes
An audible signal sounds 30 seconds after
activation. This indicates that the function is about to
finish.
The cleaning lock does not lock the main switch. The
hob can be switched off at any time.
symbol. An audible signal
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
bAutomatic safety cut-out
I f a hotplate operates for an extended period and no
A u t o m a t i c s a f e t y c u t - o u t
settings are changed, the automatic safety shut-off is
activated.
The hotplate stops heating.
indicator
or
flash alternately in the hotplate display.
œ
When you touch any symbol, the display switches off.
The hotplate can now be set again.
The point at which the safety shut-off becomes active
depends on which heat setting has been set (after 1 to
10 hours).

Wipe protection

,
and the residual heat
"
en
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex9 lv series

Table of Contents