Short Cord Instructions; The Slow Juicing Difference - Kalorik TKG FE 2000 I User Manual

Slow juicer
Table of Contents

Advertisement

❑ Do not disassemble the base.
❑ Do not put any foreign materials into the machine.
❑ Always securely clamp in place all parts before the motor is turned on.
Do not unfasten while appliance is in operation.
❑ Avoid contacting moving parts. Make sure the motor stops completely
before disassembling.
❑ Check the strainer every time you want to use the appliance. If you
detect any cracks or damage, do not use the appliance and contact the
professional service personnel to repair.
❑ Please do not use for more than 20 minutes at a time, allow motor to
cool. Pause 10 minutes minimum.
(*) Competent qualified electrician: The manufacturer's or importer's after-sales
department, or any person who is qualified, approved and competent to perform this
kind of repairs. Where
necessary give the appliance to such an electrician for repairs.

SHORT CORD INSTRUCTIONS

The appliance has a short cord in order to reduce the risk of getting entangled in or tripping over
a longer cord. Extension cords may be used if care is exercised in their use.
1.
The electrical rating of the extension cord should be at least 16 ampere. An extension cord of
less than 16 ampere could overheat and get damaged.
2.
If you use a longer cord, arrange it properly so that it does not drape over the counter top or
table top, where it could be pulled on by children or tripped over.

THE SLOW JUICING DIFFERENCE

Slow Juicing allows you to consume more fruits and vegetables in one glass than you could eat at one
time. There is no oxidation or separation in slow juicing, so it preserves more of the organic nutrients
from the food and keeps it closer to its natural state. Fresh juice from a slow juicer is absorbed directly
into the body, allowing the intake of important vitamins and nutrients from your food – your body
receives everything it needs for optimum health. In addition, you can create a wide variety of juice
recipes to enjoy from fruits and vegetables you may not normally enjoy eating whole.
The Slow Juicer uses a 2-step process in which the juice is extracted from the fruit or vegetable twice
before it enters your glass. The auger, the main component of the unit, precisely squeezes the food
without shredding or grinding it, helping you to get more juice in your glass. The Slow Juicer produces
fresh and healthy juice that's packed with more vitamins and nutrients needed for everyday living. In
addition, the Slow Juicer uses less energy, saving you money and helping to lower your carbon
footprint. One glass and you'll experience first-hand the difference between store-bought juice and
fresh, healthy goodness.
ASSEMBLY
1.
SILICONE PAD INSTALLATION (Figure 1, 1a)
Before the juice cup is installed, please confirm whether the silicone pad of the pulp outlet at the
bottom of the juice cup is properly installed.
Make the silicone pad of pulp outlet inserted into the rectangular slot.
Notes: The rubber pad must be properly installed, otherwise leakage phenomenon may occur.
When cleaning the bowl, make sure to slide the pad out and run
water through the pulp ejector to remove excess food debris.
1
1a

Advertisement

Table of Contents
loading

Table of Contents