Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for MySound BH-03
- Page 1 User’s manual BH-03 Bluetooth stereo Headset SPECIFICATIONS BH-03 Bluetooth V2.1+EDR Model no Ver. Bluetooth Profiles HSP,HFP,A2DP,AVRCP Effective Range 10Meters Music Time 10 Hours Talk Time 11Hours Standby Time Up to 250 Hours...
- Page 2 About BH-03 BH-03 is a stereo headset with Bluetooth technology. It supports the following Bluetooth profiles: HSP —— Headset Profile HFP —— Hands-free Profile A2DP—— Advanced Audio Distribution Profile AVRCP——Audio/Video Remote Control Profile Overview + key: Volume Up...
- Page 3 A) How to enter pairing mode Be sure BH-03 in power off status first. Press and hold the MFB for 6 seconds, till Red and blue Led blink alternately, or you hear the indication “Do Do” twice come out. And then release the MFB.
- Page 4 b) After successful pairing, select “BH-03” in the Bluetooth device list, and press “connect”. c) After successful connecting, the blue LED of the headset quickly blinks twice or three times every 4 seconds. Wearing the headset The string of this headset is retractable, please adjust according to the actual use. Logo “L” of headset represents left ear, Logo “R”...
- Page 5 Notes: • For some mobile phones, when you press the key of accepting on the phone, the conversation will be sent to the mobile phone. At this time, you can switch the call to headset by using the conversation switch button or through operating on the mobile phone.
- Page 6 LED indicator A) Charging LED indicator Status of the headset Red LED is on Charging Blue LED is on Finish charging B) In use. LED Indicator Status of the headset Red and blue LEDs blink alternately Pairing mode Blue LED quickly blinks once every 2 seconds. Not connected to a device Blue LED gradually turns on and off Conversation mode...
- Page 7 Manual connecting to last connected device When the headset is in standby mode and doesn’t connect to any devices, short press MFB button once, it will connect to last connected device automatically. 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. ...
- Page 8 WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ...
Need help?
Do you have a question about the BH-03 and is the answer not in the manual?
Questions and answers