Silicon Laboratories ETRX358USB Manual

The ETRX358USB is a USB-compliant device
peripheral designed to enable USB host devices
to connect to the Internet of Things over
802.15.4 Networks. The in-field upgradeable
firmware allows interaction with either ZigBee
or THREAD wireless mesh networks.
Featuring the Telegesis™ ETRX3588 wireless
mesh networking module (based on the
EM3588 System-on-Chip (SOC) from Silicon
Labs Inc.), the ETRX358USB takes advantage of
a powerful 32-bit ARM
of flash memory and 64 kB of RAM. A link
budget of up to 110 dB is ideal for typical
ZigBee and THREAD applications.
The devices make use of the standard USB
communication device class (CDC) allowing the
best possible native driver support across a
wide range of operating systems.
Typical Applications
•
Home Automation
•
Smart Metering
•
Industrial Automation (Industry 4.0)
•
Commercial Building Automation
Zigbee & Thread Compatible Radio for IoT Applications
®
processor with 512 kB
USB Interface
Figure 1.1 - Block Diagram
In a USB Stick Form Factor
Complete IoT Capable Device
•
32-bit ARM® Cortex M3 Processor
•
24 MHz CPU operation
•
2.4 GHz IEEE 802.15.4-2003
transceiver & lower MAC
®
•
512 kB Flash with read protection
•
64 kB RAM memory
•
AES128 encryption accelerator
•
General purpose timers
•
USB 2.0 Full Speed communication
Excellent RF Performance
•
Normal Mode Link budget up to 110
dB
•
–100 dBm nominal receiver sensitivity
•
–102 dBm max receiver sensitivity (1%
PER, 20 Byte packet)
•
+8 dBm max transmit power
•
Robust Wi-Fi & Bluetooth co-existence
•
Integrated high performance chip
antenna
Flexible Form Factor
•
Discrete small form factor and design
•
Monolithic PCB style integrated USB
connector
•
Integrated bright activity white LED
configurable for application
LDO Voltage
Regulator
EM3588
ETRX358USB
Chip
Antenna
User LED