Cleaning Instructions - Kruger KS-2T-5 Manual

CLEANING INSTRUCTIONS:

•Store ladder in the closed position.
•Properly secure and support ladder while in transit.
•Keep ladder clean and free from all foreign materials.
DISPOSAL:
•Dispose of all packaging, paper, cartons and plastic, plastic bags in accordance with your
local recycling regulations.
•At the end of the product's lifespan please dispose of it at an authorized household waste
recycling centre.
ATTACH THE SUPPORT BAR SECURELY INTO RAILS BEFORE USING.
A. INSERT SUPPORT BAR IN ROUND COUPLINGS SLOTS.
B. INSERT BOLTS THROUGH RAILS.
C. PLACE LOCK NUTS ON BOLTS AND TIGHTEN FULLY.
To lock hinge: Move ladder to two hinges lock position. Make sure the Lock Bolts lock in
place on both hinges. Check the bolts on both hinges to be certain they are locked.
(If necessary, move the ladder section slightly back and forth to ensure locking)
HINGE POSITIONS
• Be sure all hinges are locked before using the ladder.
• Never use anything other than hand of lift up the hinge release rod.
•Never use hinge release rod to adjust, move, or transport ladder.
•Do not use this ladder if lock bolts de not lock in place.
•Keep hinges clean and free of dirt,
paint, snow, etc.
•The hinges in this ladder have
been lubricated at the factory.
For best operation depending
on actual use clean and lubricate
hinges periodically with a light
machine oil.
THE LOCKING MECHANISM
MUST BE LOCKED BEFORE
USING LADDER
8