Table of Contents
Advertisement
Available languages
Available languages
a
a
FM antenna
While in FM mode, tune in an FM station and extend the lead
to find the best position for the reception. This antenna may
need to be repositioned if you move your unit to a new
location.
b
LINE OUT jacks
You can connect this unit to an external amplifier, cassette
tape deck, etc.
Connect the component with RCA pin cords. Make sure to
connect the white plug to the white jacks (Left) and the red
plug to the red jacks (Right).
Note:
< This output jack is a "line level" output. Do NOT connect to
the "PHONO" jack on your amplifier or distortion may occur.
< The volume level of line output cannot be adjusted by the
VOLUME control knob of this unit. Use the volume control of
your amplifier to adjust the volume.
Connection
LINE IN
R L
Amplifier, Cassete Tape Deck,
CD-R, MD, etc.
b
c
c
Speakers
Connect the left speaker's plug to L, and the right speaker's
plug to R.
< When using speakers other than those supplied with the
system, the impedance should be 6 ohms or more.
< Do not connect anything other than speakers to these
terminals.
d
AC Power Cord
Plug this AC power cord into an AC wall socket of the proper
voltage.
d
5
Advertisement
Table of Contents
