Huawei MatePad Pro User Manual page 20

If your device does not power on after you press and hold the Power button, the battery
•
may have run out. Charge for 10 minutes and then power it on.
Disconnect the charger from this device and unplug the charger from the power socket
•
once this device is fully charged or is not charging.
When the battery life becomes noticeably shorter, go to an authorised Huawei Customer
•
Service Centre to replace the battery.
It is recommended that you avoid using your device while charging.
•
Charging with a Charger
To ensure charging safety, use the charger and USB cable that came with your device.
1
Use a USB cable to connect the charger to your device.
2
Plug the charger into a power socket.
When a beeping sound is heard, your device will start charging, and the charging mode icon
and current battery level will be displayed on the charging animation screen.
Icon Charge Mode
SuperCharge
Fast charging
Standard charging
Charging Your Device with a PC
1
Connect your device to a PC or other device using a USB cable.
2
When the Use USB to dialog box is displayed on your device, touch Charge only.
If another option has been set previously, the dialog box will not pop up. Swipe down
from the upper left edge of the screen to display the notification centre, touch Settings,
then select Charge only.
Overview of Battery Icons
You can check the battery level from the battery icon on the device screen.
Battery Battery Level
Icon
Less than 10% battery remaining.
Charging, less than 10% battery remaining.
Charging, 10% to 90% battery remaining.
Essentials
17