Page 3
CLEAR OPENING HEIGHT ( FLOOR TO HEADER ) CLEAR OPENING WIDTH ( INSIDE OF TRACKS ) CLEAR OPENING WIDTH PLUS 9" ( OUTSIDE OF TRACKS ) Door dimension drawing Chase Doors Inc. 800-543-4455 3/12 DuraShield Installation Manual RB0375 Page 3...
Page 4
The inside mounting dimension of the T Brackets is Clear Opening Width + 11 inches, centered on the opening. T BRACKET MOUNTING TO DOOR HEADER DIMENSIONS COW + 11" 6" Right side shown, Left side opposite Chase Doors Inc. 800-543-4455 3/12 DuraShield Installation Manual RB0375 Page 4...
Page 5
Adjust the roll to wall dimension for both T Brackets as shown below and tighten the Bearing and Retainer bolts. REAR OF CURTAIN ROLL TO WALL MINIMUM DIMENSION 1 5/8" Chase Doors Inc. 800-543-4455 3/12 DuraShield Installation Manual RB0375 Page 5...
Page 8
Adjustment of the Limit switches and Clutch will be done after installation of the Guide Tracks. Chase Doors Inc. 800-543-4455 3/12 DuraShield Installation Manual RB0375 Page 8...
Page 9
Insert the end of the curtain into the track. Extended Guide Track Mounting Bracket Top Track Adjustment Chase Doors Inc. 800-543-4455 3/12 DuraShield Installation Manual RB0375 Page 9...
Page 11
(2) 3/8” L Bracket mounting bolts with provided fasteners as shown. The brush will contact the curtain and roll. Brush seal mounted on bottom face of door Top side brush seal and fasteners Chase Doors Inc. 800-543-4455 3/12 DuraShield Installation Manual RB0375 Page 11...
Page 12
The Roll Cover does not attach to the support brackets, just to the wall. Any openings in the end caps, for shafts etc., are to be done by the installer on site. Chase Doors Inc. 800-543-4455 3/12 DuraShield Installation Manual RB0375 Page 12...
Page 13
Guide Track with installed Velcro and the installer attaches it to the wall in an appropriate manner. Make sure end user is familiar with operation and has all manuals Chase Doors Inc. 800-543-4455 3/12 DuraShield Installation Manual RB0375 Page 13...