Harman Kardon CITATION 5.1 Specifications

5.1 Multichannel Power Amplifier
User-Configurable Outputs
The Citation® 5.1 may be used as a four, three or two-channel
amplifier, with audiophile quality in all configurations. This
flexibility permits you to configure power levels to meet
specific system requirements upon initial installation and in later
system modifications.
High Current Design
Delivers full power to speakers even when matched with
complex impedance loads from various speaker configurations.
Low Negative Feedback
Improved sonic quality with almost total freedom from TIM
(transient intermodulation distortion), THD (total harmonic distortion) and IMD (intermodulation distortion).
Quad Power Supply
Four (4) separate power supplies, one for each output channel, eliminate crosstalk among channels and provide the highest
possible performance in bridged modes.
Power-up Sequencing
When controlled by the remote turn-on system in the 5.0 AV Controller, 5.1 Multi- channel Power Amplifiers in multiple
amplifier systems turn on sequentially, each at a slightly different time, reducing power surges in a home's electrical system.
Ultrawide Bandwidth Design
Delivers all the subtleties of the source material, even inaudible harmonics that contribute to sonic performance. A Citation
design and engineering hallmark.
Oversize Heat Sinks
Fan-free convection cooling assures high system reliability and quiet operation.
THX™ Certified
The 5.1 Multichannel Power Amplifier meets or exceeds THX standards for sonic performance in the bridged mode or when
used with Dual-Drive Dipoles™.

Specifications

High current, multichannel audio power
amplifier, configurable for four, three or
General
two-channel output. THX® certified in
Description
bridged mode or with Dual-Drive
Dipoles.
4 x 100 watts @ 8 Ohms, 4 x 175
watts @ 4 Ohms
2 x 100 watts + 1 x 300 watts @ 8 Ohms
Power Output
2 x 300 watts @ 8 Ohms bridged
FTC: 20Hz - 20kHz, .03% THD, all
channels driven
100 amps/channel in dual mono
HCC
mode
< 3Hz - 200kHz ±3dB at rated
Frequency
Response output
THD/IMD Less than 0.03% at rated output
5Hz - 130kHz
Power Bandwidth
Page 1 of 2