Table of Contents
Advertisement
Manual Bluetooth pairing
About this task
NOTE:
If you were unable to pair your PN9315A automatically, perform the following procedure.
NOTE:
You can use your PN9315A only with selected Dell computers and tablets. For the list of supported devices, see
www.dell.com.
NOTE:
If your PN9315A is already listed under Bluetooth devices, remove it from the list before performing the following
steps.
Steps
1.
Press and hold the top button for 3 seconds to enable pairing mode.
The Bluetooth-pairing light starts blinking to confirm the pairing mode is enabled.
2.
In Windows Search, type Bluetooth.
3.
From the list that appears, tap or click Bluetooth Settings.
4.
Ensure that the Bluetooth is enabled.
5.
From the list of devices under Bluetooth Settings, tap or click PN9315A→ Pair.
NOTE:
If your PN9315A is not listed, ensure pairing mode is enabled on the pen.
6.
Confirm the pairing process on both pen and device.
The Bluetooth-pairing light turns solid white for few seconds to indicate the pairing is complete and then the light turns
off. After the pen and a device are paired, they connect automatically when Bluetooth is enabled and they are within the
Bluetooth range.
8
Setting up your PN9315A
Advertisement
Table of Contents
