Before Use First Use Manual electronic copy Scan the QR code below on the right to download the Narwal app in advance, get familiar with Detailed Explanation of Manual electronic copy more functions and enjoy a more convenient smart life.
Page 3
To Reduce the Risk of Fire and Electric Shock due to internal component damage, use only following : READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE) NARWAL cleaning fluid intended for use with this appliance. See the Cleaning Fluid section of this manual.
Page 4
• Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing. • Use extra care when cleaning on stairs. • Do not use without dust bag and/or filters in place. • Prevent unintentional starting. Ensure the switch is in the o -position before connecting to ba ery pack, picking up or carrying the appliance.
Page 5
The laser distance sensor of this product meets the standards for Class I Laser Products in IEC 60825-1: 2014 and will not generate hazardous laser radiation Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Product Introduction This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Product Overview Base station Automatic cleaner feeding slot Power jack Dirty water level indicator float Base station Water tank handles touchscreen Picking cavities of the base station Speaker Clean water tank Dirty water Base station cleaning tank latch components Dirty water tank Cleaning tray Cleaning base...
Control Panel Overview Low-power mode Robot Control Panel 1. Click the low-power mode. 2. Click "Confirm" . Button/indicator light Operations and Functions Click: Clean the whole house Ring button Press and hold the button for 3 seconds: Power on/off Ring indicator light Solid white indicator: The device is 3.
Notices This product is only used to clean floors in household environments, and cannot be used 5. To prevent damage to the device, do not place outdoors (such as open balconies), areas other than floors (such as sofas or window sills), the robot near any heat or water sources (such as high places, or commercial/industrial environments.
22. To transport the robot, make sure that it is turned off. It is recommended to transport it in the original packaging. 23. It is hazardous for the rotating brush to touch the power cord. Arrange the wires neatly before use. 24.