Hawksmoor TOOLSTATION 24959 Manual

2 in 1 electric raker and scarifier

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Original User's Instructions

2 in 1 Electric Raker and Scarifier

SKU: 24959

WHAT'S IN THE BOX

Collection box

Lower handle x 2

Middle handle x 2

Scarifier assembly

Scarifier roller

Raking roller

Nut x 4

Screw x 4

Cord strain relief

Allen key

Cord clip

If you do not have all these items, please contact:

www.coreservice.co.uk

Hotline: +44 01904 947568

Email support@coreservice.co.uk

PLEASE KEEP THESE INSTRUCTIONS FOR FURTHER REFERENCE

Table of Contents

Need help?

Do you have a question about the TOOLSTATION 24959 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hawksmoor TOOLSTATION 24959

Page 1 Original User’s Instructions 2 in 1 Electric Raker and Scarifier SKU: 24959 WHAT'S IN THE BOX Collection box Lower handle x 2 Middle handle x 2 Scarifier assembly Scarifier roller Raking roller Nut x 4 Screw x 4 Cord strain relief Allen key Cord clip If you do not have all these items, please contact:...
Page 2: Tools Required
TOOLS REQUIRED SPECIFICATION Technical Data Model WR6005-1500 Input voltage rating 230-240V~,50Hz Input power 1500 W No load speed 3000/min Max. cutting width 320mm Working height adjustment(scarifying) -12, -8, -4, +4 mm Working height adjustment(raking) -12, -8, -4, +4 mm Collection box volume Water protection class IPX4 Net weight (approx.)
Page 3 WARNING! The vibration emission value during actual use of the tool can differ from the declared value depending on the ways in which the tool is used. Identify safety measures to protect the operateor that are based on an estimation of exposure in the actual conditions of use(taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
Page 4 Wear protective clothes. SWITCH OFF! Remove plug from the mains immediately if the cable is damaged or cut. Switch the product off and disconnect it from the power supply before assembly, cleaning, adjustments, maintenance, storage and transportation. Read the instruction manual Objects thrown by the product could hit the user or other bystanders.
Page 5 Beware of sharp tines. Tines continue to rotate after the motor is switched Off. Switch off! Remove plug from mains before cleaning or maintenance. Remove plug from the mains immediately if the cable is damaged or cut Guaranteed sound power level Waste electrical products should not be disposed of with household waste, please recycle where facilities exist.
Page 6: Health And Safety
HEALTH AND SAFETY WARNING - Read all safety instructions! Failure to observe the safety instructions may result in electric shock, burns and/or severe injury. Keep the safety instructions for future reference. - This device is not intended to be used by persons (incl. children) with limited physical, sensory or mental abilities or with a lack of experience and/or knowledge unless they are supervised by a person responsible for their safety or were instructed on the...
Page 7 e) Always wear sturdy footwear and long trousers when operating the tool. Do not operate the tool with bare feet or open sandals. f) Check the area, in which you are going to operate the tool, and remove all stones, sticks, wires, bones and other objects that may get caught and hurled away.
Page 8 k) Do not change the motor settings and do not overrev the motor. I) Disengage ('declutch') all work tools and drives prior to starting the motor. m) Start the tool with due care in accordance with the manufacturer's instructions. Make sure to keep a safe distance between your feet and the work tools.
Page 9 room. c) Regularly check the collecting device for signs of wear and tear or damaged parts. d) Inspect the tool regularly and replace worn out or damaged parts for reasons of safety. Safety instructions for lawn scarifier and rakes a) Check the mains and extensions cables for signs of damage or ageing before use.
Page 10 e) Keep extension cords away from the tines. A damaged cable may come into contact with active parts (hazard of electric shock). f) Disconnect the power supply (e.g., pull the plug from the mains socket) in the following cases: - every time you leave the device unattended; - before removing blockages/obstructions of the tool;...
Page 11 - When working with the device, a certain level of noise cannot be avoided. Noisy work should be scheduled for hours, during which it is al lowed by statute or other local regulations. Ad here to any applicable rest times and limit your working time to the necessary minimum time.
Page 12 - Do not use the cable to carry or hang up the tool or to pull the plug out of the socket. Keep the cable away from heat, oil and sharp edges or moving parts of the tool. Damaged or tan gled cables increase the risk of electric shock.
Page 13 with only one hand. - Hold the guide bar and lift the tool to move it from one place to another. Always switch off the tool, disconnect the plug and wait until the application stops before carrying out mainte nance. Electrical safety - The electric motor has been designed to use single phase voltage only.
Page 14 water, smoking and illnesses that impact the blood vessels and the circulatory system as well as severe or long-lasting exposu re to vibrations are known to be factors in the de velopment of Raynaud's syndrome. Observe the following in order to reduce the risk of Raynaud's syndrome and Carpal tunnel syndrome: •...
Page 15: Component List
COMPONENT LIST Start/stop lever Upper handle Lock-off button Middle handle Cord strain relief Lower handle Mounting set for handle bar Collection box Cord clip with Allen key Working height adjustment lever Handle Wheel Scarifier deck Discharge opening Not all the accessories illustrated or described are included in standard delivery.
Page 16: Assembly And Use
ASSEMBLY AND USE Assembling the handle (figs. 1, 2 and 3) fig. 1 • Slide the two bottom handle parts (1 c) into the locating holes in the housing until they reach the stops (fig. 1). Make sure the holes in the lower handle face outwards for screw fixing.
Page 17 Assembling the collection box (fig. 6) fig. 6 • Slide the collecting box (6) over the metal frame and fasten it to the frame with the clips (fig. 6) • Lift up the protective cover (5). • Hang the grass collecting box in place by hooking the 2 hooks into the corresponding holes on the discharge opening (14) Note: If you do not wish to collect the grass, the machine can...
Page 18 For scarifying Correct cutting blade fitted already thus no need for extra installation. For raking fig. 8 • Use an Allen key to replace the working roller. • Turn the machine over and loosen the two screws (A) on the bearing shell (C) (fig. 8). •...
Page 19 How to use the raker (using rake roller 11) • By raking you remove the dead matter, moss and weed which disfigures a lawn. The build up of dead grass provides a mat of absorbent fibres which pre vents water gelling through to the ground •...
Page 20 WARNING! Extensive vibration of the product during op- eration is an indication of damage! The product should be promptly inspected and repaired! 1. Check the product, its power cord and plug as well as accessories for damage before each use. Do not use the product if it is damaged or shows wear 2.
Page 21 Checking by an expert is necessary after hitting an obstacle if the motor comes to an immediate standstill if the blades of the scarifier roller are bent if the toothed belt is defective if the wire leading to the motor is damaged if there are other damages GENERAL OPERATION (Fig.
Page 22: Care And Cleaning
CARE AND CLEANING WARNING! Before carrying out any repairs or servicing work, you must ensure that the prod uct has been disconnected from the power sup ply. Repairs and maintenance work other than described within this instruction manual may be performed only by qualified specialist! To ensure long and reliable service, carry out the follow ing maintenance regularly.
Page 23 Transportation 1. Switch the product off and disconnect it from power supply before transporting it anywhere 2. Turn the adjustment lever (7) to the "HIGH" position 3. Attach transportation guards, if applicable 4. Always transport the product by its handle 5.
Page 24: Troubleshooting
TROUBLE SHOOTING WARNING! Only perform the steps described in these instructions! All further inspection, main tenance and repair work must be performed by a qualified specialist! Contact a specialist if the problem cannot be solved by yourself! WARNING! The product does not perform properly, or sound are abnormal, or motor cannot be started, or stopped as described, or the cutting device does not work properly, or any other ir- regularity, or malfunction occurs, do not attempt to repair the product by yourself Please contact helpline or service center.
Page 25 DECLARATION OF CONFORMITY / PERFORMANCE Product Code: 24959/WR6005-1500 Product Description: 2 in 1 Electric Raker and Scarifier 1.Toolstation Limited, Express Park, Bristol Road, Bridgwater, Somerset TA6 4RN This declaration of conformity is issued under the sole responsibility of Toolstation 2. Object of the declaration The object of the declaration described above is in conformity with the relevant Community harmonization legislation: Supply of Machinery (Safety) Regulations 2008...
Page 26: Environmental Information
ENVIRONMENTAL INFORMATION When your product comes to the end of its life or you choose to update or upgrade it by replacing it, please do not dispose of it with your normal household waste. Please recycle where facilities exist. When you need to dispose of this product, check with your retailer or local authority for suitable options.
Page 27: Customer Support
GUARANTEE Toolstation products deliver reliable service for normal, household use in domestic settings. All Toolstation products are individually tested before leaving the factory. If you are a consumer and you experience a problem with your Toolstation product, which is found to be defective due to faulty materials or workmanship within the Guarantee Period, this Toolstation Guarantee will cover repair or - at the discretion of Toolstation –...