Advertisement
Quick Links
Thank you for choosing K9 Tactical Gear for your E-Tac Collar. Please follow the steps below for proper assembly:
1.
Remove E-Tac Cover from Collar. Place aside for now, as you will need to re-apply in a later step.
2. Undo One-Wrap Velcro, leave the Velcro strips loose and positioned apart.
1
E-Tac Collar Assembly Guide | K9 Tactical Gear
Advertisement
Summary of Contents for E-Tac Tactical Gear K9
- Page 1 E-Tac Collar Assembly Guide | K9 Tactical Gear Thank you for choosing K9 Tactical Gear for your E-Tac Collar. Please follow the steps below for proper assembly: Remove E-Tac Cover from Collar. Place aside for now, as you will need to re-apply in a later step.
- Page 2 E-Tac Collar Assembly Guide | K9 Tactical Gear 3. Unscrew/Remove E-Collar contact points from your receiver. Do not force the threaded studs through the pre-fabricated holes with prongs still attached as this will damage the collar and void your product warranty.
- Page 3 E-Tac Collar Assembly Guide | K9 Tactical Gear 5. Feed One-Wrap Velcro strips through guides on the receiver. Join the strips together with to secure the receiver.
- Page 4 E-Tac Collar Assembly Guide | K9 Tactical Gear 6. Screw the contact points back onto the receiver from the inside of the collar.
- Page 5 E-Tac Collar Assembly Guide | K9 Tactical Gear Begin applying the cover by aligning loop Velcro end closest to the V-Ring attachment. Work your way towards the receiver, firmly pressing down Velcro around all edges of receiver. Continue until entire cover is...
Need help?
Do you have a question about the Tactical Gear K9 and is the answer not in the manual?
Questions and answers