Door Reversal Instructions - RCA RFR176-C-BLACK User Manual

OPERATING INSTRUCTIONS

DOOR REVERSAL INSTRUCTIONS

If the appliance is placed on its back or side for any length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in to avoid damage to the internal components.
1. Remove the screw securing the hinge cover and remove the hinge cover. Remove the two screws securing
the upper hinge and remove the upper hinge. Remove the hinge hole covers from the top left side of the
cabinet.Remove the door from the cabinet. See figure A.
2. Remove the hinge hole cover from the top left side of the door and place it in the hinge hole on the top
right side of the door. See figure B.
3. Remove the solid foot from the bottom left side of the cabinet and remove the adjustable foot and lower
hinge from the bottom right side of the cabinet. Install the lower hinge and adjustable foot on the bottom
left side of the cabinet and install the solid foor on the bottom right side of the cabinet. See figure C.
4. Place the door on the cabinet and install the upper hinge on the top left side of the cabinet. Before tightening
the screws in the upper hinge,ensure that the top of the door is level with the top of the cabinet and that the
rubber gasket is making a good seal with the cabinet all the way around. Install the hinge cover over the
hinge and install the hinge hole covers in the screw holes on the top right side of the cabinet. See figure D.
5