Bush Hog HT417 Operator's Manual
  1. Manuals
  2. Brands
  3. Bush Hog Manuals
  4. Tedders
  5. HT417
  6. Operator's manual
Bush Hog HT417 Operator's Manual

Bush Hog HT417 Operator's Manual

Hay tedder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Published 05/22
OPERATOR'S MANUAL
This Operator's Manual is an integral part of the safe operation of this machine and must
be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety
and Operation Instructions contained in this manual before operating the equipment. C01-
Cover
BUSH HOG
®
2501 Griffin Ave.
Selma, AL 36703
334-874-2700
www.bushhog.com
This Manual applies to
Models with Serial Numbers
271855 and above.
© 2022 Alamo Group Inc.
HT417
HT417H
HAY TEDDER
Part No.
50068961
$0.00

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HT417 and is the answer not in the manual?

Questions and answers

Related Manuals for Bush Hog HT417

Summary of Contents for Bush Hog HT417

  • Page 1 HT417 This Manual applies to Models with Serial Numbers HT417H 271855 and above. HAY TEDDER 50068961 Published 05/22 Part No. OPERATOR’S MANUAL This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment.
  • Page 2 To the Owner/Operator/Dealer All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS SAFETY SECTION ....................... 1-1 Safety Messages ..............................1-2 Operator Safety Instructions and Practices ......................1-3 Equipment Operation Safety Instructions and Practices..................1-4 Connecting or Disconnecting Implement Safety Instructions & Practices ............1-7 Transporting Safety Instructions and Practices ....................1-8 Maintenance and Service Safety Instructions and Practices ................
  • Page 4 PTO RPM and Ground Speed .......................... 4-19 Engaging the Power Take Off (PTO) ........................ 4-19 Shutting Down the Implement ........................... 4-20 DISCONNECTING THE HAY TEDDER FROM THE TRACTOR ..............4-20 HAY TEDDER STORAGE ..........................4-21 TRANSPORTING THE TRACTOR AND IMPLEMENT ..................4-22 Transport Instructions for Manual Fold ......................

  • Page 5: Safety Section

    SAFETY SECTION Safety Section 1-1...

  • Page 6: Safety Messages

    Safety Messages. Always use good common sense to avoid hazards. (SG-2) Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las medidas de seguridad. (SG-3) HT417/HT417H 05/22 Safety Section 1-2 © 2022 Alamo Group Inc.

  • Page 7: Operator Safety Instructions And Practices

    Never allow children to play on or around Tractor or Implement. Children can slip or fall off the Equipment and be injured or killed. Inadvertent contact with controls can cause the Implement to shift or fall crushing themselves or others. (SG-25) HT417/HT417H 05/22 Safety Section 1-3 © 2022 Alamo Group Inc.

  • Page 8: Equipment Operation Safety Instructions And Practices

    A-Frame. Lower the implement carefully to the ground. Do not put hands or feet under lifted components. (S3PT-1) Do not back up with this implement. Backing could damage the machine or its components. (S3PT-4) HT417/HT417H 05/22 Safety Section 1-4 © 2022 Alamo Group Inc.
  • Page 9 Place the tractor shift lever into a low range or parking gear to prevent the tractor from rolling. Never dismount a Tractor that is moving or while the engine is running. Operate the Tractor controls from the tractor seat only. (SG-9) HT417/HT417H 05/22 Safety Section 1-5 © 2022 Alamo Group Inc.
  • Page 10 (SG-23) Do not exceed the rated PTO speed for the Implement. Excessive PTO speeds can cause Implement driveline or component failures resulting in serious injury or death. (SG-26) HT417/HT417H 05/22 Safety Section 1-6 © 2022 Alamo Group Inc.

  • Page 11: Connecting Or Disconnecting Implement Safety Instructions & Practices

    Serious bodily injury and/or equipment failure can result from using a PTO adapter. Consult an authorized dealer for assistance if the Implement driveline does not match the Tractor PTO. (S3PT-14) HT417/HT417H 05/22 Safety Section 1-7 © 2022 Alamo Group Inc.

  • Page 12: Transporting Safety Instructions And Practices

    Do not transport unless 3-Point lift lever is fully raised and in the latched transport position. Dropping implement in transport can cause serious damage to the tractor and/or Implement and possibly cause the operator or others to be injured or killed. (S3PT-02) HT417/HT417H 05/22 Safety Section 1-8 © 2022 Alamo Group Inc.
  • Page 13 Make certain that at least 20% of the tractor’s weight is on the front wheels to maintain safe steerage. Slow down on rough or uneven surfaces. (STI-01) HT417/HT417H 05/22 Safety Section 1-9 © 2022 Alamo Group Inc.

  • Page 14: Maintenance And Service Safety Instructions And Practices

    PTO, and turn off the tractor engine. Push and pull the Remote Cylinder lever in and out several times prior to starting any maintenance or repair work. (S3PT-09) HT417/HT417H 05/22 Safety Section 1-10 © 2022 Alamo Group Inc.
  • Page 15 Failure to properly service, repair and maintain this Implement in good operating condition could cause component failure and possible serious injury or even death. (SG-35) HT417/HT417H 05/22 Safety Section 1-11 © 2022 Alamo Group Inc.
  • Page 16 These parts are made and tested to Bush Hog specifications. Non-genuine "will fit" parts do not consistently meet these specifications. The use of “will fit” parts may reduce equipment performance, void warranties, and present a safety hazard. Use genuine Bush Hog parts for economy and safety.

  • Page 17: Decal Location

    SAFETY Decal Location HT417/HT417H 05/22 Safety Section 1-13 © 2022 Alamo Group Inc.
  • Page 18 Maintain Weight For Steerage 00725746 PELIGRO Spanish-Get Translation 00763977 INSTRUCT Notice To Owner 999200 WARNING Multi-Hazard General D859 WARNING Genuine Bush Hog Parts 50063360 LOGO Bush Hog 50068924 NAME HT417 Model Name 50068925 NAME HT417H Model Name 2738332 REFLECT Red Reflector...

  • Page 19: Decal Description

    SAFETY Decal Description HT417/HT417H 05/22 Safety Section 1-15 © 2022 Alamo Group Inc.
  • Page 20 SAFETY HT417/HT417H 05/22 Safety Section 1-16 © 2022 Alamo Group Inc.
  • Page 21 SAFETY HT417/HT417H 05/22 Safety Section 1-17 © 2022 Alamo Group Inc.

  • Page 22: Federal Laws And Regulations

    Some regulations specify that no one under the age of 16 may operate power machinery. It is your responsibility to know what these regulations are in your own area or situation. (Refer to U.S. Dept. of Labor, Employment Standard Administration, Wage & Home Division, Child Labor Bulletin #102.) HT417/HT417H 05/22 Safety Section 1-18 © 2022 Alamo Group Inc.

  • Page 23: Introduction Section

    INTRODUCTION SECTION Introduction Section 2-1...
  • Page 24 25 hp (18 kw) PTO Slip Clutch Standard Standard Operating Speed 10 mph (16 Km/h) 10 mph (16 Km/h) All data is indicative. Bush Hog reserves the right to change, without advance notice. HT417/HT417H 05/22 Introduction Section 2-2 © 2022 Alamo Group Inc.
  • Page 25 INTRODUCTION The HT417/HT417H Hay Tedder is one of the fastest and most efficient hay tedders available. Rotor speed and forward drive speed should be selected for each individual job, since there are large variations in the nature and properties of different crops.
  • Page 26 3. Record the Hay Tedder Model and Serial Numbers on the Warranty page at the front of the Operator’s Manual. Keep this as part of the permanent maintenance file for the implement. HT417/HT417H 05/22 Introduction Section 2-4 © 2022 Alamo Group Inc.
  • Page 27 2. If the unit has been subjected to misapplication, abuse, misuse, negligence, fire or other accident. 3. If parts not made or supplied by Bush Hog have been used in connection with the unit, if, in the sole judgment of Bush Hog such use affects its performance, stability or reliability.

  • Page 29: Assembly Section

    ASSEMBLY SECTION Assembly Section 3-1...

  • Page 30: Checking The Machine On Delivery

    • If a forklift truck is used, ensure that the forks are positioned as wide apart as possible. MACHINE Weight Packing KG/LBS Weight KG/LBS HT417 525/1157 460/1014 HT417H 540/1190 475/1047 HT417/HT417H 05/22 Assembly Section 3-2 © 2022 Alamo Group Inc.

  • Page 31: General Assembly

    7. Item 5, 4 Spring pins Ø10x55 (0.39” x 2.17”) 8. Item 7, 4 Spring pins Ø6x55 (0.24 x 2.17”) 9. Item 10, 4 Flatwashers Ø17 (0.67”) 10. Item 11, 4 nuts M16Connect the fittings HT417/HT417H 05/22 Assembly Section 3-3 © 2022 Alamo Group Inc.
  • Page 32 NOTE: At this point the tine arms could be attached because the machine is in a favorable position, but once the arms are attached it is more difficult to turn the machine over. If the assembler wishes to attach then at this stage, See Step “E”. HT417/HT417H 05/22 Assembly Section 3-4 © 2022 Alamo Group Inc.

  • Page 33: Assembling Steps

    ASSEMBLY Assembling Steps STEP “A” Attach guard 1 to the central gearbox 2 using nuts 3 In this step, you will use: Item 3, 2 nuts M8. HT417/HT417H 05/22 Assembly Section 3-5 © 2022 Alamo Group Inc.
  • Page 34 In this step you will use: Item 1, 3 grease nipples M6 Item 4, 2 shims ø30.5x39.8x1(ø1.2” x 1.57” x 0.04”) Item 5, 3 split pins ø5x40 (ø0.2”x1.57”) Item 7, 1 pin ø20x66 (ø079”x2.6”) HT417/HT417H 05/22 Assembly Section 3-6 © 2022 Alamo Group Inc.
  • Page 35 Item 3, 1 pin ø15 (ø0.59”) Item 4, 1 clip ø3 (ø0.12”) STEP “E” You will find tine bars 1(RH) and 2(LH) in four bundles (two RH and two LH) of six pieces each. HT417/HT417H 05/22 Assembly Section 3-7 © 2022 Alamo Group Inc.
  • Page 36 Item 8, 24 spring washers ø13 (ø0.51”) Item 9, 24 washers ø13 (ø0.51”) Item 9. (View “K”) 24 Washers ø12.5-28.5x3 (ø0.5”) Item 10, 24 screws M12x40 (0.47”x1.38”) Item 11, 24 nuts M12 HT417/HT417H 05/22 Assembly Section 3-8 © 2022 Alamo Group Inc.
  • Page 37 Item 7. 4 spring washer ø13 (ø0.51”) Item 8, 4 screws M10x55 (0.39”x2.16”) Item 9, washers ø10 (ø.0.39”) Item 10, 4 nuts M10 (ø0.39”) Item 11, 2 grease nipples M10 HT417/HT417H 05/22 Assembly Section 3-9 © 2022 Alamo Group Inc.
  • Page 38 In this step, you will use: Item 1, 2 grease nipples M10 Item 2, 4 grease nipple M6 Item 6, 8 flat washers ø8.5 (ø0.33”) Item 7, 8 screws M8x16 (0.31”x0.63”) HT417/HT417H 05/22 Assembly Section 3-10 © 2022 Alamo Group Inc.

  • Page 39: Assembly Steps For Hydraulic Kit

    ASSEMBLY Assembly Steps for Hydraulic Kit HT417/HT417H 05/22 Assembly Section 3-11 © 2022 Alamo Group Inc.
  • Page 40 Continue to secure cylinders 7-8 (RH-LH) using pins 1 and springs pins 2. In this step, you will use: Item 1, 2 pins ø20x95 (0.79”x3.74”) Item 2, 4 spring pins ø6x35 (0.24”x1.38”) HT417/HT417H 05/22 Assembly Section 3-12 © 2022 Alamo Group Inc.
  • Page 41 Item 1, 4 hose collars ø18 (ø45/64”) Item 2, 4 screws M6x25 (0.24”x1”) Item 3, 1 copper washer 1/2” Item 4, 1 rapid coupling 1/2” Item 8, hose (Step E) HT417/HT417H 05/22 Assembly Section 3-13 © 2022 Alamo Group Inc.

  • Page 42: Hydraulic Tilt Kit Assembly

    ASSEMBLY Assembly is now completed, and the machine should appear as shown in the illustration. HYDRAULIC TILT KIT ASSEMBLY HT417/HT417H 05/22 Assembly Section 3-14 © 2022 Alamo Group Inc.
  • Page 43 Item 2, 2 Shims M30.5-40x1 (1.2”-1.57”x0.39”) Item 3, 2 Nuts M30 Item 4, 1 Shim M20.5 - 40x6 (.81”-1.57”x.24”) Item 5, 1 Pin M20x70 (.79”x2.76”) Item 6, 2 Spring Pin M6x35 (.24x1.38”) HT417/HT417H 05/22 Assembly Section 3-15 © 2022 Alamo Group Inc.
  • Page 44 Item 4, 1 Flow Reducer 3/8”x.8mm Item 5, 1 Nipple 3/8”x3/8” Item 6, 2 Hose 3/8”x1.35-138” Item 7, 2 Washers 1/2” Item 8, 2 Quick Couplers 1/2” Item 9, 8 Zip Ties #10 HT417/HT417H 05/22 Assembly Section 3-16 © 2022 Alamo Group Inc.

  • Page 45: Hay Tedder Adjustments

    5 back into contact with joint pin 6 and bushing 4 into contact with nut 5. Before tightening them to each other, make the adjustments in the next step. HT417/HT417H 05/22 Assembly Section 3-17 © 2022 Alamo Group Inc.
  • Page 46 When the correct transport position is reached, bring bushing 4 into contact with the front face of cylinder 7, bring nut 5 into contact with bushing 4 and tighten them together. With this adjustment the machine is ready for working and transport. HT417/HT417H 05/22 Assembly Section 3-18 © 2022 Alamo Group Inc.

  • Page 47: Operation Section

    OPERATION SECTION Operation Section 4-1...

  • Page 48: Standard Equipment And Specifications

    Pictures contained in this section are intended to be used as a visual aid to assist in explaining the operation of a Hay Tedder and are not necessarily of a HT417. Some pictures may show shields removed for purposes of clarity.

  • Page 49: Operator Requirements

    Serious injury or death to the operator or others could result if the operator is under the influence of drugs or alcohol. (SG-27) HT417/HT417H 05/22 Operation Section 4-3 © 2022 Alamo Group Inc.

  • Page 50: Tractor Requirements

    PT417/417H requires a tractor with at least 22hp. Operating the implement with a tractor that does not have adequate power may damage the tractor engine. Exceeding the recommended horsepower may cause damage by overpowering the unit in heavy operating conditions. HT417/HT417H 05/22 Operation Section 4-4 © 2022 Alamo Group Inc.

  • Page 51: Drawbar - Pull-Type Mower

    Never allow passengers to ride on the tractor or attached equipment. Riders can easily fall off and be seriously injured or killed from falling off and being ran over. It is the operator’s responsibility to forbid all extra riders at all times. OPS-U- 0008 HT417/HT417H 05/22 Operation Section 4-5 © 2022 Alamo Group Inc.

  • Page 52: Dismounting The Tractor

    Place the tractor shift lever into a low range or parking gear to prevent the tractor from rolling. Never dismount a Tractor that is moving or while the engine is running. Operate the Tractor controls from the tractor seat only. (SG-9) HT417/HT417H 05/22 Operation Section 4-6 © 2022 Alamo Group Inc.

  • Page 53: Starting The Tractor

    Always shut the Tractor completely down, place the transmission in park, and set the park- ing brake before you or anyone else attempts to connect or disconnect the Implement and Tractor hitches. (S3PT-15) HT417/HT417H 05/22 Operation Section 4-7 © 2022 Alamo Group Inc.

  • Page 54: Attaching The Hay Tedder

    8 and pin 7, and rotate the parking stand so that it is parallel with the drawbar 5. Fasten into the new position using pin 7 and clip 8. At this point quick-release coupling 9 should be attached to the tractor coupling 10. Fasten rope 11 to lever 12. HT417/HT417H 05/22 Operation Section 4-8 © 2022 Alamo Group Inc.

  • Page 55: Safety Tow Chain

    PTO shaft, release the locking collar, and position the yoke until the locking collar balls are seated onto the PTO shaft. Push and pull the driveline back and forth several times to ensure a secure attachment. OPS-HT-0003 HT417/HT417H 05/22 Operation Section 4-9 © 2022 Alamo Group Inc.

  • Page 56: Driveline Length Check

    This is achieved by inserting the safety pins and bolts (1) in the special slots (2) on the power takeoff shafts on both the tractor and implement ends. Refer To Image OP-226. HT417/HT417H 05/22 Operation Section 4-10 © 2022 Alamo Group Inc.

  • Page 57: Pre-Operation Inspection And Service

    Engine coolant level and condition • Power brake fluid level • Power steering fluid level • Fuel condition and level • Sufficient lubrication at all lube points • Air filter condition OPS-U-0030 HT417/HT417H 05/22 Operation Section 4-11 © 2022 Alamo Group Inc.

  • Page 58: Hay Tedder Pre-Operation Inspection/Service

    Ensure the manual canister is secured to the equipment with the operator’s manual inside. • Ensure all safety signs are in place and legible. Replace missing, damaged, and illegible decals. OPS-U- 0011 HT417/HT417H 05/22 Operation Section 4-12 © 2022 Alamo Group Inc.
  • Page 59 The engine coolant fluid level is full The radiator is free of debris The air filter is in good condition Operator’s Signature:___________________________________________________ DO NOT OPERATE an UNSAFE TRACTOR or IMPLEMENT HT417/HT417H 05/22 Operation Section 4-13 © 2022 Alamo Group Inc.
  • Page 60 There is no evidence of hydraulic leaks The tires & wheel(s) are in good condition Wheel lug nuts are tight Operator’s Signature: DO NOT OPERATE an UNSAFE TRACTOR or TEDDER HT417/HT417H 05/22 Operation Section 4-14 © 2022 Alamo Group Inc.

  • Page 61: Driving The Tractor And Implement

    When operating in traffic always use the Tractor’s flashing warning lights and reduce your speed. Be aware of traffic around you and watch out for the other guy. (SG-19) HT417/HT417H 05/22 Operation Section 4-15 © 2022 Alamo Group Inc.

  • Page 62: Starting The Tractor

    When operating in traffic, always use the Tractor’s flashing warning lights and reduce your speed. Be aware of traffic around you and watch out for the other guy. HT417/HT417H 05/22 Operation Section 4-16 © 2022 Alamo Group Inc.

  • Page 63: Driving The Tractor And Hay Tedder

    Special attention should be paid to foreign debris, rough terrain, steep slopes, and passersby and animals in the area. OPS-U- 0015 HT417/HT417H 05/22 Operation Section 4-17 © 2022 Alamo Group Inc.

  • Page 64: Operating The Hay Tedder In Field (Manual Fold)

    10.1 Operating the Hay Tedder In Field (Manual Fold) For the HT417/HT417H manual fold, lateral arms 1 & 2 should be lowered before hand. To do this, rotate pin 4 so that spring pins 3 on it, slides over tab “C”, causing pin 4 to exit from the hole in the inside pipe of the strut assembly (RH and LH side).

  • Page 65: Pto Rpm And Ground Speed

    If you hear unusual noises or see or feel abnormal vibrations, disengage the PTO immediately. Inspect the implement to determine the cause of the noise or vibration and repair the abnormality. OPS-HT- 0017 HT417/HT417H 05/22 Operation Section 4-19 © 2022 Alamo Group Inc.

  • Page 66: Shutting Down The Implement

    Always shut the Tractor completely down, place the transmission in park, and set the park- ing brake before you or anyone else attempts to connect or disconnect the Implement and Tractor hitches. (S3PT-15) HT417/HT417H 05/22 Operation Section 4-20 © 2022 Alamo Group Inc.

  • Page 67: Hay Tedder Storage

    Never allow children to play on or around Tractor or Implement. Children can slip or fall off the Equipment and be injured or killed. Inadvertent contact with controls can cause the Implement to shift or fall crushing themselves or others. (SG-25) HT417/HT417H 05/22 Operation Section 4-21 © 2022 Alamo Group Inc.

  • Page 68: Transporting The Tractor And Implement

    4, is not touching tab C (RH and LH side). Then raise lateral arms 1 & 2 by pulling on guards A-B until pin 4 of the spring strut assembly enters hole D (RH and LH side) of the inside pipe of the strut assembly. OPS-HT- 0055_A HT417/HT417H 05/22 Operation Section 4-22 © 2022 Alamo Group Inc.

  • Page 69: Transport Instructions For Hydraulic Fold

    9 is firmly hooked on pin 10 (RH and LH side) in order to guarantee safety while the machine is being transported. OPS-HT- 0055_B NOTE: The machine ready for transport should appear as show on Fig. The hydraulic fold also show this configuration. HT417/HT417H 05/22 Operation Section 4-23 © 2022 Alamo Group Inc.

  • Page 70: Transporting On Public Roadways

    Make certain that the “Slow Moving Vehicle” (SMV) sign is installed in such a way as to be clearly visible and legible. When transporting the Equipment use the Tractor flashing warning lights and follow all local traf- fic regulations. (SG-6) HT417/HT417H 05/22 Operation Section 4-24 © 2022 Alamo Group Inc.
  • Page 71 Always stay alert when transporting the tractor and implement on public roads. Use caution and reduce speed if other vehicles or pedestrians are in the area. OPS- U- 0022 HT417/HT417H 05/22 Operation Section 4-25 © 2022 Alamo Group Inc.

  • Page 72: Hauling The Tractor And Implement

    OPS-U- 0025 HT417/HT417H 05/22 Operation Section 4-26 © 2022 Alamo Group Inc.

  • Page 73: Maintenance Section

    MAINTENANCE SECTION Maintenance Section 5-1...

  • Page 74: General Maintenance

    Make sure all pins have cotter pins and washers. Serious injury may occur from not maintaining this machine in good working order. (SG-21) HT417/HT417H 05/22 Maintenance Section 5-2 © 2022 Alamo Group Inc.

  • Page 75: Lubrication Points

    General checking of bolts, security pins and split pins to be carried out initially after the first 8 hours of use. Subsequently every 50 hrs and whenever the machine is laid up for extended periods. Grease Type: NGLI 2 EP HT417/HT417H 05/22 Maintenance Section 5-3 © 2022 Alamo Group Inc.

  • Page 76: Driveline Maintenance

    -Each time the machine is connected to the tractor. Driveline Maintenance Driveline Dismantle Turn the two eccentric pins on the ferrule until the protective cone comes free. HT417/HT417H 05/22 Maintenance Section 5-4 © 2022 Alamo Group Inc.

  • Page 77: Driveline Assembly

    MAINTENANCE Withdraw the shaft protective gaurd. Check the condition of the ferrule and all protective parts. Driveline Assembly Lubricate supporting ferrule seating using Multi- Purpose Gear Oil. HT417/HT417H 05/22 Maintenance Section 5-5 © 2022 Alamo Group Inc.
  • Page 78 MAINTENANCE Refit the supporting ferrule. Reattach the protective guard to the driveline shaft by turning the eccentric pins on the supporting ferrule. HT417/HT417H 05/22 Maintenance Section 5-6 © 2022 Alamo Group Inc.

  • Page 79: Storage

    NOTE: These values apply to fasteners as received from supplier, dry or when lubricated with normal engine oil. They do not apply if special graphited or molydisulphide greases or other extreme pressure lubricants are used. This applies to both UNF fine and UNC coarse threads. HT417/HT417H 05/22 Maintenance Section 5-7 © 2022 Alamo Group Inc.
  • Page 80 MAINTENANCE HT417/HT417H 05/22 Maintenance Section 5-8 © 2022 Alamo Group Inc.
  • Page 81 TO THE OWNER/OPERATOR/DEALER To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need. The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum safety...
  • Page 82 HT417/ HT417H HAY TEDDER HT417/HT417H-SOM-05/22 P/N 50068961 Printed U.S.A...

This manual is also suitable for:

Ht417h

Table of Contents