Page 1
KANO-RPI3-VE User Manual 2017.05 1. Product Introduction This product design is based on the Raspberry Pi 3 Model B V1.2 board, change USB hub chip, remove Ethernet function and RJ-45 connector, remove DSI and CSI connector according to client’s requirements.
3. Operating Characteristics Parameter Conditions Min. Typ. Max. Unit Input Power Supply Operating Current 5.1V power network Power Ripple 3.3V, 2.5V, Voltage 1.8V and 1.2V power network Operating ℃ Ambient Temperature Storage ℃ Temperature Operating Ambient Humidity Operating 2000 Altitude Operating Air 1060 Pressure...
Page 5
6. Interface Micro SD Card Socket 6.1 Micro USB Connector 5.1V/2.5A DC via micro USB connector. 6.2 HDMI 1x full size HDMI. 6.3 3.5mm Audio Jack Support audio out and TV out. 6.4 USB 2.0 2 2Layer USB A port, support full USB2.0 speed.
Page 6
6.5 GPIOs 2.54mm 2*20 pin socket for GPIOs. 6.6 Chip Antenna 2.4GHz chip antenna for BLE4.0 and IEEE 802.11 b/g/n WLAN. 6.7 Micro SD Card Socket Micro SD card for loading operating system and data storage.
Page 7
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may...
Page 8
IC Caution: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class [B] digital apparatus complies with Canadian ICE-003.