Related Manuals for DM Bath DMV2402
Summary of Contents for DM Bath DMV2402
-
Page 1: Table Of Contents
INSTALLATION GUIDE MODELS DMV2402 / DMV3002 / DMV3602 24" single Getting Started Required Tools & Materials Floating Vanity Installation Drawer & Door Adjustment 30" single Soft-Close Drawer Removal/Installation Sink & Countertop Installation Care & Maintenance Limited Warranty 36" single Technical Support... -
Page 2: Getting Started
Getting Started PLEASE READ CAREFULLY - IT IS RECOMMENDED THAT A QUALIFIED, LICENSED TRADES PROFESSIONAL INSTALL YOUR UNIT. All products must be inspected prior to installation. If damages are found due to transit or manufacturing defects then DO NOT PROCEED WITH INSTALLATION and advise supplier immediately. Manufacturer will not be liable for any installation, removal or re-installation costs. -
Page 3: Floating Vanity Installation
Follow instructions for SINK & COUNTERTOP Choose the positioning of hardware of your choice INSTALLATION if using a DM BATH Countertop and (not included) on the vanity cabinet. Mark the screw Sink. If using a custom top and sink, follow Manufacturer hole location. -
Page 4: Drawer & Door Adjustment
Drawer & Door Adjustments To make adjustments to doors or drawers please refer to the diagram below. Soft-Close Drawer Removal & Installation... -
Page 5: Sink & Countertop Installation
Vessel Sink & Countertop Installation Read lifting pre-caution above. Remove the If you have a DM Bath Backsplash and/or Side countertop from the box while maintaining its Splash, install next. Apply 100% Silicone Sealant vertical position. Lift countertop over cabinet base on the back of the backsplash/sidesplash. - Page 6 Immediately wipe away any excess sealant. Let dry for 24 hours. If you have a DM Bath back/side splash, install next. Carefully turn the countertop and sink over. Place the top on the vanity while maintaining a vertical position.
-
Page 7: Care & Maintenance
This warranty is void if the product has been moved from its initial place of installation or has been used for commercial, industrial or other non-residential use. • Warranted item must have been purchased only from an authorized Dezign Market dealer, carrying DM BATH products. A copy of the original purchase receipt is required for validation. •... -
Page 8: Technical Support
Technical Support Our customer support department is available Monday - Friday 10:00 a.m. - 5:00 p.m. EST. We can help with any questions you may have. 1 888 398 8380 support@dezignmarket.com DEZIGNMARKET.COM...
Need help?
Do you have a question about the DMV2402 and is the answer not in the manual?
Questions and answers