Harman Kardon KP 1 Specifications page 2

KP 1
IN-WALL KEYPAD
Specifications
• Mounting System: Compatible
With Most Standard Electrical
Junction Boxes
• Connections: 8P8C (RJ-45)
Straight-Through (Standard T568B)
System Connection to PA 4000
Amplifier; Three-Pin Eurostyle
Terminal Block Connector for Use
With Optional Third-Party IR Sensor
(+12 Volts, Signal, Ground)
• Dimensions (H x W x D): 4"x 1-5/8" x
1- 9/16"(103mm x 41.2mm x 40.1mm)
• Recommended Third-Party
Optional Infrared Sensor: Xantech
Micro Link ™ Model 490-00
• Dimensions of Cutout for
Third-Party Optional IR Sensor:
1/2" (12.7mm)
[NOTE: Dimensions include buttons and
chassis, but not optional infrared sensor.]
All features and specifications are subject
to change without notice.
Features
Remotely Controls Power On/Off
and Volume Up/Down When Used
With PA 4000 Amplifier • Simple
Three-Button Design Is Easy to Use
• May Be Used With Optional
Third-Party Infrared Sensor to
Control Harman Kardon or Other
Products Equipped With IR Remote
Input Jacks • Easy Installation in
Standard Electrical In-Wall Junction
Box Using Single-Cable Connection
to PA 4000 • Three-Pin Connector
Provides Connection for Power
When Using Third-Party Sensor •
Decora-Style In-Wall Mounting
System Blends In With Room Décor
(Wall Plate Not Included)
®
250 Crossways Park Drive
Woodbury, NY 11797
800-422-8027 FAX 516-682-3523
www.harmankardon.com