Warning Plates On The Turbocharger - ABB HT597528 Operation Manual

Operation Manual / 2 Safety / A100-M axial
1 Safety / 1.7 Warning plates on the turbocharger
1.7

Warning plates on the turbocharger

Warning plates are attached to the turbocharger and must be observed. The warning plates
must always be present in the intended locations and must be legible.
Fig. 1: Warning plate
If warning plates are not present in the intended locations or are not legible, they must be
replaced with new warning plates. The necessary information can be found in the Operation
Manual, Chapter 4 Product description.
Turbochargers supplied to the enginebuilder without insulation must be equipped later with
warning plates on the insulation. This is the responsibility of the enginebuilder.
© Copyright 2020 ABB. All rights reserved. HZTL4023_EN Rev.E October 2020