Page 3
WiMi300A User Manual v.1.4 • The RF module limited to OEM installation ONLY. The OEM integrator is responsible for the compliance to all the rules that apply to the product in to which this certified RF module is integrated. •...
Page 4
WiMi300A User Manual v.1.4 between the radiator & your body. This device is intended only for OEM integrators under the following conditions: • The antenna must be installed such that 20 cm is maintained between the antenna and users, and The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.
WiMi300A User Manual v.1.4 Purpose of this Document This document provides simple circuit description and detailed specifications of the WiMi300A™ WiFi Module. The document is intended for Hardware designer wishing to implementation of WiMi300A module into their own systems. Related Documents...
Page 6
WiMi300A User Manual v.1.4 Key Features • 3x3 MIMO antenna configuration using two spatial streams • IEEE Std. 802.11 n Network Standards • Modulation modes: BPSK, QPSK, 16QAM and 64QAM • WPS Certified- Wireless Protected Setup for easy set up and security configuration •...
WiMi300A User Manual v.1.4 Electrical Specifications Parameter Symbol Value Unit Note Min. Typ. Max. Supply Voltage(I/O) VDD 3.3V Input voltage to digital pins Storage temperature TSTG +125 ℃ Table 2. Absolute Maximum Ratings Attention Stress above the Max. values listed here may cause permanent damage to the device.
WiMi300A User Manual v.1.4 Pinout Description PIN # Name Type Description WAKE# Link reactivation 2,24,39,41,52 +3.3V aux Power +3.3V Power 3,5,8,10,12,14, Reseved Reserve Leave unconnected 16,17,19,20, 45,47,49,51 4,9,15,18,21, Power Ground 26,27,29,34, 35,37,40,43,50 6,28,48 +1.5V (Reserved) Reserve Not used until now, leave unconnected.