Table of Contents
Advertisement
Undo and remove the screws in
3.
the horizontal transport strut using
a T20 screwdriver.
Remove the transport strut.
4.
4.6 Connecting the appliance
Connecting the water inlet hose
Connect the water inlet hose.
1.
Installation and connection en
Connect the water inlet hose to a
2.
tap (26.4 mm = 3/4").
When connecting to a 21 mm = ½"
3.
tap, first fit the adapter with a seal-
ing washer.
Open the water tap carefully and
4.
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
Secure the water outlet hose
▶
against unintentional loosening.
Note: Observe the draining heights.
The maximum draining height is
100 cm.
15
Advertisement
Table of Contents
