Flow-Rite Eagle Eye Essential IV Installation & Operation Instructions

Components
(1) EA-040 (BLACK)
(1) EA-041 (RED)
(1) EA-042 (WHITE)
(1) EA-043 (ORANGE)
1
Disconnect single point watering hose
from swivel T on chosen cell.
3
*
Insert Eagle Eye with sensor into cell.
Rotate valve into lock position.
5
Fasten #8 ring terminal with supplied
screw into negative strap minimum 3
maximum 4 cells towards negative post
(DO NOT CROSS ROWS)
BL-644
Eagle Eye Essential IV
Installation and Operation Instructions
(1) EA-048 (MAVERICK)
(1) Instruction Sheet
(1) Self-tapping Screw
For installation on small plate batteries, see page 2.
Tools Required
Power Drill
1/4" Hex Head Driver Bit
2
Remove valve.
4
Remove yellow cap and install swivel T.
6
Reconnect single point watering
hose onto swivel T.
Specifications
Max Current Draw: 15 mA
Operating Voltage Range: 4V-12V
Operating Temp: -40°F - 176°F