Siemens iQ300 EH LD Series User Manual page 10

en powerBoost
Select the required power level.
4.
a The cooking time begins to count down.
a Once the cooking time has elapsed, the cooking
zone switches itself off and an audible signal
sounds.
Note: When you set a cooking time for a cooking zone
in which the fryingSensor is activated, the cooking time
will not start counting down until the selected temperat-
ure level has been reached.
Changing or switching off Switch-off timer
Touch ​ ⁠ twice.
1.
Select the cooking zone.
2.
3. In the settings area, change the time or set to
delete the time.
Press ​ ⁠ to confirm.
4.
7.2 Timer
Enables the activation of a timer of 0–99 minutes. This
function can be used independently of the cooking
zones and other settings. It does not automatically
switch off the cooking zones.
Switching on Timer
Touch ​ ⁠ .
1.
​ ⁠ and ​ ⁠ light up.
a
8 powerBoost
You can use this function to heat up large volumes of
water more quickly than with ​ ⁠ .
This function is available for all cooking zones,
provided the other cooking zone in the same group is
not in use.
9 shortBoost
You can use this function to heat up pans more quickly
than with ​ ⁠ .
This function is available for all cooking zones,
provided the other cooking zone in the same group is
not in use.
10
Set the required time in the settings area.
2.
Press ​ ⁠ to confirm.
3.
a The time begins to count down.
a An audible signal sounds and the displays flash
once the time has elapsed.
Changing or switching off the Timer
Touch ​ ⁠ .
1.
In the settings range, change the time or set to
2.
to delete the time.
Press ​ ⁠ to confirm.
3.
7.3 countUp function
​ ⁠ to
The stopwatch function displays the time that has
elapsed since activation.
Switching on countUp function
Touch ​ ⁠ .
▶
​ ⁠ light up.
a
a The time begins to count down.
Switching off countUp function
Touch ​ ⁠ .
▶
a The displays for the run time programming function
go out.
a The function has been deactivated.
8.1 Switching on powerBoost
Select the cooking zone.
1.
Touch ​ ⁠ . The ​ ⁠ display lights up.
2.
a The function is switched on.
8.2 Switching off powerBoost
Select the cooking zone.
1.
Touch ​ ⁠ . The ​ ⁠ display goes out and the cooking
2.
zone switches back to the ​ ⁠ power level.
a The function has been deactivated.
Note: In certain circumstances, this function may
switch itself off automatically in order to protect the
electronic elements inside the hob.
9.1 Recommended applications
¡ Do not place a lid on the pan.
¡ Never leave pans unattended when they are heating
up.
¡ Only use cold pans.
¡ Use pans with a completely flat base. Do not use
pans with a thin base.
9.2 Switching on shortBoost
Select the cooking zone.
1.
Touch ​ ⁠ twice.
2.
a The function is switched on.
​ ⁠ lights up.
​ ⁠