Subscribe to Our Youtube Channel
Related Manuals for SimPure Y7
Summary of Contents for SimPure Y7
- Page 6 �lushing frequency. IMPORTANT: ALWAYS FULLY EMPTY THE Y7 FEED WATER TANK BEFORE REFILLING WITH FRESH POTABLE (TAP) WATER, DO NOT TRY TO REFILL THE TANK MOUNTED ON THE SYSTEM (ALWAYS REMOVE IT FIRST).
- Page 7 Dispense more water at once: Push and hold the Flushing button for 5-seconds; puri�ied water will start to �low from the outlet until the 0.45-Gallons internal pure tank empties. To manually stop dispensing water, push any other button.
- Page 8 - The System will automatically �lush the membrane for the �irst 30 seconds. While �lushing, Power on the indicator light will be on. - Push the button, and the System will �lush for 60 seconds and stop. Manual membrane �lushing To cancel the manual �lush, push the button a second time.
-
Page 9: Filter Replacement
Filter Replacement Recommended Replacement Cycle 6 Months 6 Months... - Page 12 Whole House Filtration System Under Sink Water Filter System...
Need help?
Do you have a question about the Y7 and is the answer not in the manual?
Questions and answers
I changed both filters. how do I reset and flush both filters?
To reset and flush the filters on a SimPure Y7:
1. Flush the system automatically – When powered on, the system will flush the membrane for 30 seconds. The indicator light will be on during this process.
2. Manually flush the membrane – Push and hold the Flushing button for 5 seconds. Purified water will flow from the outlet until the internal 0.45-gallon pure tank empties.
3. Perform an extended flush – Push the Flushing button once, and the system will flush for 60 seconds before stopping automatically. To cancel the flush, push the button again.
4. Important Note – Always fully empty the Y7 feed water tank before refilling with fresh potable (tap) water. Remove the tank from the system before refilling.
This answer is automatically generated