Advertisement
Quick Links
Installation guide for module
Purpose of this guide
This guide contains information regarding the installation and safe handling of photovoltaic
modules made by Gazioğlu Solar Enerji San. Ve Tic. A.Ş. hereafter is referred to as
"GSE".
All instructions should be read and understood before installing the modules. The
installation of modules should conform to all the safety precautions in this guide when
installing the modules. The local standards should also be followed in such installations. If
there are any questions, please contact our sales department for further assistance.
Before installing a photovoltaic system, the installer should be familiar with the mechanical
and electrical requirements for such a system. Keep this guide in a safe place for future
reference (maintenance).
The mechanical and electrical installation of modules should consult the corresponding
laws and regulations, such as electrical method, building law.
Scope
PV modules are ideal for charging storage batteries used to power remote homes,
recreational vehicles, boats, telecommunication systems and other electrical applications.
This manual contains important installation, maintenance and safety information. The word
"module" as used in this manual refers to one or more PV modules.
"GSE" modules are designed to fulfill the criteria of protection class II requirements
according to IEC61730-part1.
The modules are qualified for protection class II: Hazardous voltage (IEC61730: higher
than 50V DC; EN61730: higher than 120V), hazardous power applications (higher than
240W) where general contact access is anticipated (Modules qualified for safety through
EN IEC61730-1 and -2 ).
Disclaimer of liability:
The installation techniques, handling and use of this product are beyond company control.
Therefore, "GSE" does not assume responsibility for loss, damage or expense resulting
from improper installation, handling or misuse.
General Safety Information
Ensure that the module is used only in applications for which it is suitable (see "Installing
Modules"). All work on a PV system (installation, setup, maintenance) must be carried out
only by appropriately qualified and authorized engineers.
The appropriate DIN standards, construction rules and safety instructions must be followed
during installation.
Warning!
PV modules generate electricity as soon as they are exposed to the sunlight. One
Date:2021.06
Doc No:GSE-M-0001 Ver.A
1
Advertisement
Summary of Contents for GSE GSEM430-144M
- Page 1 This manual contains important installation, maintenance and safety information. The word “module” as used in this manual refers to one or more PV modules. “GSE” modules are designed to fulfill the criteria of protection class II requirements according to IEC61730-part1.
- Page 2 Date:2021.06 Doc No:GSE-M-0001 Ver.A...
-
Page 3: Unpacking And Storing Modules
Do not twist the module.Do not twist the module. Do not mark on the rear of the module using sharp objects. The accessible PV module surface shall be smooth and free from sharp edges, burrs, etc., Installing Modules： Date:2021.06 Doc No:GSE-M-0001 Ver.A... - Page 4 The voltage in series should not exceed the system voltage nominated by manufacturer. When designing the system, recommended the maximum number of modules in parallel should be no more than four Date:2021.06 Doc No:GSE-M-0001 Ver.A...
- Page 5 Moment of force is 5N·m for module mounting. Stainless steel M8 nut Stainless steel spring washer Stainless steel M8 t-head bolt It is suggested to confirm according to the voltage and current actually used in the power station. Date:2021.06 Doc No:GSE-M-0001 Ver.A...
- Page 6 The grounded connection must be made by a qualified electrician. Connect module frames to each other using cables with cable lugs. All the junctions on the conductive connection must be fixed. Soldering is not required. Date:2021.06 Doc No:GSE-M-0001 Ver.A...
- Page 7 ·Use of suitable materials Use cable extensions and plugs that are designed for outdoor applications. Ensure that they are in perfect electrical and mechanical condition. Only the cables with one conductor are used. Date:2021.06 Doc No:GSE-M-0001 Ver.A...
- Page 8 ≤2000m . Mechanical Load Pressure: 2400Pa (245 Kg/m2) *Mechanical load bearing specifications of the module is based on GSE Solar mounting methods. A professional system installer must be responsible for the mechanical load calculations based on the specific system design.
-
Page 9: Module Specifications
Do not change the PV components (diode, junction box, plug connectors) that can be serviced by “GSE” authorized distributor or dealer without voiding the warranty. Given the module a sufficient tilt (at least 15°) to keep one self-clean effect in normal conditions (rainfall will have a self-cleaning effect). - Page 10 GSE450-120M Mono crystalline 41.25 34.21 13.62 13.16 20 A GSE445-120M Mono crystalline 41.10 34.06 13.52 13.07 20 A GSE440-120M Mono crystalline 40.95 33.91 13.41 12.98 20 A GSE435-120M Mono crystalline 40.82 33.85 13.31 12.85 20 A Date:2021.06 Doc No:GSE-M-0001 Ver.A...
- Page 11 GSE350-72P Poly crystalline 47.23 39.45 9.38 8.87 20 A GSE355-72P Poly crystalline 47.38 39.75 9.42 8.93 20 A GSE360-72P Poly crystalline 47.53 39.96 9.49 9.01 20 A GSE365-72P Poly crystalline 47.68 40.15 9.53 9.09 20 A Date:2021.06 Doc No:GSE-M-0001 Ver.A...
- Page 12 Mono GSEN335-120M 40.71 34.16 10.24 9.81 20 A crystalline Mono GSEN330-120M 40.44 33.80 10.20 9.76 20 A crystalline Mono GSEN325-120M 40.13 33.62 10.16 9.67 20 A crystalline Mono GSEN320-120M 40.02 33.40 10.12 9.58 20 A crystalline Date:2021.06 Doc No:GSE-M-0001 Ver.A...
- Page 13 Mono GSEN315-120M 39.90 33.19 10.08 9.49 20 A crystalline Date:2021.06 Doc No:GSE-M-0001 Ver.A...
Need help?
Do you have a question about the GSEM430-144M and is the answer not in the manual?
Questions and answers