Advertisement
Quick Links
Outdoor Bottle Filing Station with Pet Station
SKU: 605wf110-1 Installation
INSTALLER
To assure you install these models easily and correctly, PLEASE READ THESE SIMPLE
INSTRUCTIONS BEFORE STARTING THE INSTALLATION. CHECK YOUR INSTALLATION FOR
COMPLIANCE WITH PLUMBING, ELECTRICAL, AND OTHER APPLICABLE CODES. After
installation, leave these instructions with the Fountain for future reference.
PAGE 1
Advertisement
Summary of Contents for PARK WAREHOUSE 605wf110-1
- Page 1 Outdoor Bottle Filing Station with Pet Station SKU: 605wf110-1 Installation INSTALLER To assure you install these models easily and correctly, PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE STARTING THE INSTALLATION. CHECK YOUR INSTALLATION FOR COMPLIANCE WITH PLUMBING, ELECTRICAL, AND OTHER APPLICABLE CODES. After installation, leave these instructions with the Fountain for future reference.
-
Page 2: Installation Instructions
INSTALLATION INSTRUCTIONS IMPORTANT ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON IMPORTANT! INSTALLER PLEASE NOTE. THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TO WATER LINES IS A COMMON PROCEDURE. THIS GROUNDING MAY BE IN THE BUILDING OR MAY OCCUR AWAY FROM THE BUILDING. - Page 3 8 - O.500" HOLES EQUALLY SPACED ON TWO O12.00" B.C. 26" 660mm 22" O 14" 559mm 356mm (2 PL) 29" 737mm 10" 3" 254mm 76mm 10" 254mm 14 9/16" 371mm 41 7/16" 1053mm ORIFACE 57 1/8" 1451mm HEIGHT 19" 483mm 40 5/16"...
- Page 4 8 - O.500" HOLES EQUALLY SPACED ON TWO O12.00" B.C. 26" 22" 660mm 559mm O 14" 356mm (2 PL) 29" 10" 737mm 254mm 3" 76mm 14 9/16" 371mm 10" 254mm 64" 1626mm 34 9/16" 878mm ORIFACE 19" 44" 483mm HEIGHT 1118mm 33 7/16"...
- Page 5 18, 27 BASIN Vandal-Resistant Bubbler FIG. 1 ARM ONLY 14 19, 27 PAGE 5...
-
Page 6: Troubleshooting And Maintenance
TROUBLESHOOTING AND MAINTENANCE ACTUATION OF QUICK CONNECT WATER FITTINGS: Fountain is provided with lead-free connectors which utilize an o-ring water seal. To remove tubing from the fitting, relieve water pressure, push in on the gray collar while pulling on the tubing. (see Fig.2) To insert tubing, push tube straight into fitting until it reaches a positive stop, approximately 3/4".