Advertisement
Battery
Installation
1,5V x 3
AA (LR6)
For longer life, use
alkaline batteries.
• Locate the battery compartment on
the bottom of the toy.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver and remove the door.
• Insert three AA (LR6)
alkaline batteries.
• Replace the battery compartment
door and tighten the screw. Do not
over-tighten.
• If this toy begins to operate
erratically, you may need to reset the
electronics. Slide the power switch
off and back on.
• When sounds or lights become
faint or stop, it's time for an adult to
change the batteries.
• Protect the environment by
not disposing of this product
with household waste
(2002/96/EC). Check your
local authority for recycling
advice and facilities.
Battery Safety
Information
In exceptional circumstances, batteries
may leak fluids that can cause
a chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the
product. Dispose of batteries safely.
Do not dispose of this product in
a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
Advertisement
