Samsung WA48H7400AP Service Manual page 17

Part
Clutch Assembly
(continued)
Figure Description
1. Separate the top cover assembly by
lifting and pushing ahead the top part of
the assembly
2. Remove the 2 screws holding the panel
control Separate all the wires connected
to the housing.
3. Remove the 4 screws fixing the tub-
cover and separate the tub-cover.
4. Separate the pulsator-cap by inserting
the tip of a (-) screwdriver between the
pulsator-cap and the pulsator and then
lifting the screwdriver up (↑).
5. Remove the bolt holding the pulsator
with a 10mm wrench.
Disassembly and Reassembly _ 15