EFFILUX RandomDot-000 User Manual

Please take a while to consider and read this brochure before using your new device.
User security
•
Do not look directly or with any optical instrument the light beam
•
IP54 Classification : Protection against dust and water projections from all directions
•
Avoid any contact with the LED or with the projection lens
•
Use the device in an environment at 0°C to +50°C with no excessive moisture: high humidity and high
temperature could damage the device
•
Do not use the device in an environment with oil fumes and steam
•
Do never try to fix any damages to the product by yourself
•
Make sure you are using a correct power supply before connecting the device
Do not inverse electrical polarity – check your connections and the conventions before turning on the power
•
supply
•
Make sure you consider an adapted connector to link the device to the power supply
•
Make sure you are using a power supply with the 62368 standard for power supplies safety
Maintenance
For all maintenance operation, the product must be switched off.
To handle the optical components, wearing gloves is strongly recommended.
To clean the optical components, use compressed air duster if there is some dust.
RandomDot-000
If you have any doubt, please contact EFFILUX.
Any improper use voids the warranty
USER MANUAL
RandomDot-000
ID #016729[C]
Version 1.1.2021
MAJ:10 mai 2021