Zektor ZEK-HDMI2-SP2 Quick Setup Manual

ZEK-HDMI2-SP2
QUICK SETUP GUIDE
B

INITIAL SETUP

CONNECT INPUT DEVICE

1
Using the 'HDMI Input' port
source device (i.e Blu-Ray player) using a HDMI
cable
(not supplied).

CONNECT OUTPUT DEVICES

2
Using the 'HDMI Output' ports
device (i.e TV) using a HDMI cable (not supplied).

CONNECT POWER

3
Use the supplied power supply, connect to the DC
5V port . Ensure the sink devices are powered on
C
before powering on the splitter.
Please note: Certain sources will only read the
EDID once, so if you are not getting the correct
resolution, please try rebooting the source device.
12635 Danielson Court, Suites 201/202/203,
sales@zektor.com | (858) 748-8250
HDMI UHD 18Gbps
1 -2 HDMI SPLITTER
A
Zektor US, Inc
Poway, CA, 92064
www.zektor.com
, connect to the
, connect your sink
B
A
C