Page 1
Technology User’s Manual HD Video Player/Recorder Model Name: Z3-MVPR-01 Version 1.04.15c October 10, 2012 Before attempting to connect or operate this product, please read these instructions carefully and save the manual for future use. Technology Tel: +1.402.323.0702 www.z3technology.com sales@z3technology.com _______________________________________________________________________________________ Technology, LLC ♦...
Page 2
Revision History Version Date Change Note Author 1.1.0 1/5/10 Original System 1.1.1 5/6/10 Updated System 1.1.2 5/7/10 Made correction 1.1.3 6/25/10 Added MPEG-2 TS and HTTP Option 1.1.4 11/11/10 Added Web Server Control of System 1.1.5 11/17/10 Updated VLC Instructions 1.1.6 5/17/11 Updated Encoder Configuration Options...
TABLE OF CONTENTS 1.0 GENERAL INFORMATION ..........................4 1.1 PREFACE ............................... 4 1.2 ABOUT THE MANUAL ........................... 4 2.0 PARTS LIST ..............................4 INCLUDED PARTS ........................... 4 2.2 OPTIONAL ACCESSORIES ........................... 5 FEATURES ..............................5 OPERATING CONTROLS ......................... 6 4.1 FRONT VIEW ..............................6 4.2 REAR VIEW ..............................
Designed to excel at encode and stream or encode to file, the Z3- MVPR-01 can also playback networked video and audio streams or locally stored content. The Z3-MVPR-01 is the ideal solution for industrial video, video distribution, digital signage & security and remote monitoring.
3.0 FEATURES The Z3-MVPR-01 is a high definition, low cost, network-enabled media encoder with the following features: H.264 BP & MP, MPEG-4 SP and MJPEG video encoding up to 1080p30 and 720p60 H.264 BP & MP, MPEG-4 SP and MJPEG video decoding up to 1080p30 if source is another Z3-MVPR- ...
SD Card HDMI Output SYSTEM CONNECTIONS The System can be controlled via the web server on the Z3-MVPR-01. It can also be controlled via the serial port. PC SETUP Initially, the simplest way to setup the networked PC to communicate with the Z3- MVPR-01 is to put the PC on the same subnet as the Z3-MVPR-01.
6. Type the IP address of the Z3-MVPR-01 in your web Linux users browser (http://192.168.XX.XX) and then the Z3- The below information is for how to specify...
In the Local IP Settings Section type in your desired Local IP settings • Hit “Save User” to save your desired settings • Power cycle the Z3-MVPR-01 • The new IP settings will now take effect _______________________________________________________________________________________ Technology, LLC ♦ 100 N 8 ST, STE 250 ♦...
1. Press “Stop Decoder” on the Decoder Control menu 2. Once the decoder has stopped, type in your desired IP settings 3. Hit “Save User” to save your desired settings 4. Power cycle the Z3-MVPR-01 5. The new IP settings will now take effect _______________________________________________________________________________________ Technology, LLC ♦...
Default Gateway 192.168.0.XX STREAMING OPERATION After connecting your video/audio source and configuring the Z3-MVPR-01 Encoder, hit “Start Encoder” so the status below says “Status: Running.” If you are using the serial command instead, type “S” to start streaming. The way to set up VLC as your stream receiver on your PC differs depending on the format of your output stream.
2. On the Media menu choose “Open File” (Cntrl + O) 3. Under the Media Files category, choose “All Files (*)” 4. Choose the SDP file provided by Z3 Technology 5. If the original video is interlaced, the video can be deinterlaced as follows: a.
TERMINAL OUTPUT Z3 Technology, LLC DM368-MOD H.264 Streaming Encoder +=================================================+ Current I - Change video input COMPONENT V - Change video codec H.264 | A - Change audio codec N - Change network address 225.1.2.3 T - Change transport F - Change framerate divider 1...
SYSTEM MENU CONTROL H.264 Streaming Encoder System Menu Control I - Video Input Options Component, RGB, Composite_A, Composite_B, V - Video Codec Options H.264, MPEG4, MPEG2 A - Audio Encoder Options AAC, PCM, None N - Network Address Custom T - Transport RTP, TSVBR, TSCBR, F - Frame Rate Divider 1, 2, 3...
UPDATING FIRMWARE 8.1 SD CARD Locate the UPD .img file on your Z3 Server user account Place SD card into computer Open the zwriter.exe windows program (provided by Z3) Select the UPD .img file Select correct location for your SD card Do NOT make mistake on this item. This will cause wherever you are writing to be overwritten.
9.0 TROUBLESHOOTING No video is usually caused by networking issues. o First: check IP address and Netmask. Ping PC from Z3-MVE-02 and ping Z3-MVE-02 from PC. Use direct connection from Z3-MVE-02 to PC without router/customer network. Once video connection is established, then add in customer specific network equipment. o Second: check to make sure firewalls are turned off o Third: check video source.