Shimaden SR70 Series Instruction Manual

Thank you for purchasing the Shimaden SR70 Series. Please check that the delivered product is the correct item you
ordered. Please do not begin operating this product until you have read this instruction manual thoroughly and
understand its contents.
"Notice"
Please ensure that this instruction manual is given to the final user of the instrument.
Preface
This instruction manual is meant for those who will be involved in the wiring, installation, operation and routine maintenance of the SR70
series (SR71, SR72, SR73 and SR74).
This manual describes the care, installation, wiring, function, and proper procedures for the operation of SR70 (SR71, SR72, SR73, SR74) series. Keep this
manual at the work site during operation of the SR70 series. While using this instrument, you should always follow the guidance provided herein.
For matters regarding safety, potential damage to equipment and/or facilities, additional instructions are indicated by the following headings:
WARNING
Exercise extreme caution as indicated. This heading indicates hazardous conditions that could cause injury or death of personnel.
CAUTION
Exercise extreme caution as indicated. This heading indicates hazardous conditions that could cause damage to equipment and/or facilities.
NOTE
This heading indicates additional instructions and/or notes.
The mark designates a protective conductor terminal. Make sure to properly ground it.
SR70 (SR71 • 72 • 73 • 74) Series
Digital controller
Instruction Manual
SR70F-1EJ/E Oct. 2000