Lifemax Talking Atomic Watch Quick Start Manual

Speaks the time and date in a clear voice with radio controlled accuracy
40 pence (exc. VAT) per product sold is paid to REL, which covenants all its taxable profits to RNIB, registered charity (no. 226227).
Models covered by this manual include: 407GL, 407GB, 407LL & 407LB
IF YOU HAVE PURCHASED THIS WATCH FROM THE RNIB PLEASE
ENSURE YOU CONTACT LIFEMAX DIRECTLY WITH ANY FAULTS,
WARRANTY CLAIMS OR BATTERY REPLACEMENTS. THIS IS TO
ENSURE YOUR ENQUIRY IS DEALT WITH SWIFTLY AND WILL HELP
TO REDUCE THE AMOUNT OF TIME YOU ARE WITHOUT YOUR
WATCH DURING REPAIR. PLEASE CALL 01635 874323.
IMPORTANT- THIS WATCH IS IN POWER SAVING MODE WHEN RECEIVED
In the power saving mode the hands are stopped at the 1 o'clock position.
To turn the watch on, press and hold the button at 2 o'clock until the
hands start to spin. The hands will stop when they match the internal

Button Functions

The following functions are applicable when the watch is in NORMAL mode
S1: Located at 2 o'clock, the watch will announce
the time when pressed once and the date when
pressed twice. If pressed three times, the watch
will announce the country signal it is set to
receive and whether this has been updated.
S2: Recessed at 4 o'clock, when pressed the watch
will announce the alarm time and whether the
alarm is on or off.
C: Located at 3 o'clock, pulling out the crown will stop
the watch and reset the hands. You should not use
the crown when the hands are turning quickly
407_Range_IM_240720V2.indd 1 407_Range_IM_240720V2.indd 1
Talking Atomic Watch
Thank you for purchasing your Lifemax Talking Atomic
Watch. Your watch is radio controlled, enabling it to set the
time and date automatically, as well as adjust for daylight
savings. It announces the time and date in a natural male
English voice at the touch of a button.
Your watch is preset to receive the UK time signal. The UK
transmitter is located in Anthorn, Cumbria and broadcasts
up to 620 miles (approx 1,000km). In addition to the UK,
an atomic signal is available in Germany, Japan and USA
(Pacific, Mountain, Central and Eastern).
In regions where an atomic signal cannot be received, the
time can be set manually.
The date function is only available when the watch has
received the atomic signal.
timekeeping.
Page 1
S1
C
S2
24/07/2020 11:56 24/07/2020 11:56