Advertisement
Compression
XAVC, Avid DNxHD(R),
Apple ProRes 422
Audio
Digital audio signal format
Sampling frequency
48 kHz (video sync)
Quantization
24 bits
Headroom
20 dB / 18 dB / 16 dB / 15 dB / 12 dB /
9 dB (selectable)
I/O connectors
When ENCODER mode is selected (per board)
SDI INPUT
1 to 4
BNC (4),
HD SDI (1.485 Gbps) SMPTE ST 292-1/
BTA-S004B compliant
3G SDI (2.97 GHz) SMPTE ST 424
Level A, B
SDI OUTPUT
INPUT MONITOR 5 to 8
BNC (4),
HD SDI (1.485 Gbps)
3G SDI (2.97 GHz)
Does not satisfy the SDI signal standard, and should be
used for input signal monitor applications only.
MONITOR BNC (2),
HD SDI (1.485 Gbps) SMPTE ST 292-1/
BTA-S004B compliant
TIMECODE INPUT
BNC (1), 0.5 to 5 Vpp, 10 kΩ
TIMECODE OUTPUT
BNC (1), 1.5 Vpp, low impedance
DIGITAL AUDIO (AES/EBU) INPUT
BNC (4),
CH 1/2 to CH 7/8, AES/EBU format,
unbalanced
Note
When connecting devices for AES/EBU signal input/
output, use a cable whose length is less than 300 meters
(984 feet).
When DECODER mode is selected (per board)
SDI OUTPUT
1 to 8
BNC (8),
HD SDI (1.485 Gbps) SMPTE ST 292-1/
BTA-S004B compliant
3G SDI (2.97 GHz) SMPTE ST 424
Level A, B
SDI OUTPUT
MONITOR BNC (2),
HD SDI (1.485 Gbps) SMPTE ST 292-1/
BTA-S004B compliant
TIMECODE OUTPUT
BNC (1), 1.5 Vpp, low impedance
DIGITAL AUDIO (AES/EBU) OUTPUT
BNC (4),
CH 1/2 to CH 7/8, AES/EBU format,
unbalanced
File sharing
SHARE PLAY 1 to 2
RJ-45 (2), Network Interface 10G Copper
Monitoring
NMI MONITOR 1 to 2
RJ-45 (2), Network Interface 1G Copper
MONITOR
HD SDI (1.485 Gbps) SMPTE ST 292-1/
BTA-S004B compliant
Reference
REF INPUT
BNC (2, including 1 loop through),
75 Ω with terminal switch
HD (tri-level sync)
SD (Black Burst)
NTSC: 0.286 Vpp, 75 Ω
PAL: 0.3 Vpp, 75 Ω
Remote
REMOTE1/2 to REMOTE7/8
RJ-45 (4)
GPIO (25P)
25-pin D-Sub, female (1)
NETWORK1 to 2
RJ-45 (2), 1000BASE-T
MAINTENANCE
USB (1)
NETWORK
SFP+ (1)
10GBASE-SR/LR (Add-in Card)
1) Network card connected to the unit
•
Intel Ethernet Converged Network Adapter
X520-DA1
For information about network cards, visit the
following site.
http://www.intel.com/support/go/network/
adapter/userguide.htm
2) Available only when an SFP+ module is
installed.
Supplied accessories
Operation Guide (1)
Installation Manual (1)
Operation Manual (CD-ROM) (1)
Cable, RJ45-DSUB
Part No. 1-848-424-12 (SONY) (4)
Optional accessories
Expansion memory board
PWSK-4401 (2 TB)
SDI input/output board
PWSK-4504
BPU Share Play board
PWSK-4505
1) 2)
17
Specifications
Advertisement
