Remora CL Series User Manual

REMORA CL Series Automatic Chlorine Feeder
Keep the manual for future reference
CL-01
REMORA CL series automatic chlorine feeder is designed to be used side by side with your
filtration system. The feeder is driven by the pressure difference between its outlet and
inlet which pushes water through it. It uses slow-dissolve chlorine, bromine or active oxygen
large or small tablets (or sticks) ONLY. You should NEVER use other type of chemical. CL-01 and
CL-01A can hold up to 2kg of tablets while CL-02 and CL-02A can hold up to 4kg. Such capacity
should be able to provide 1 to 2 weeks' chlorination for large pools. The feeder has a dial type
control valve to adjust the flow rate through itself, by regulating the valve setting and the
amount of tablets placed in the feeder, the chlorine feed rate needed to maintain the
proper chlorine level of your pool can be readily tuned.
WARNING: READ CAREFULLY AND KEEP THE MANUAL FOR FUTURE REFERENCE
This feeder can ONLY be used with slow-dissolving Chlorine, Bromine or Active Oxygen tablets.
Do NOT mix with other type of chlorine or chemical, otherwise it may cause explosion or fire.
Great care must be taken while opening the feeder. Always switch off pump and close all available valves
before opening. Do NOT inhale air from any chemical feeder or container. Always protect your eyes,
skin and clothing from any chemical.
Do NOT open a feeder while the pump is running.
To prevent gas from building up in the feeder, make sure the pool return line valve is kept open-
except when opening or servicing. Always read the labels warning information and closely follow
chlorine manufacture's and or dealer's recommendation for proper conditioning and daily chlorine
requirements for your particular pool.

DIRECTIONS FOR USE

1) Before starting up your chlorine feeder your pool/spa should be properly conditioned with a
chlorine level of 1.0 to 1.5ppm. Directions and instructions from dealer and chemical
manufacturer should be followed.
2) The chlorine demand for pools and spas varies according to load, usage, temperature, sunlight
etc. Initially you should experiment to determine the proper amount of chlorine and the correct
valve setting required for our pool and filter time cycle. Taking a 90 cubic meter pool as a
reference, we suggest You place about 1.8kg slow dissolve tablets in your feeder and leave
the dial valve setting at No.3.(Increase or reduce the chlorine amount basing on the pool size,
for example, for 135 cubic meter pool add 50% more chlorine.) Check chlorine residual daily
CL-02 CL-01A
1
CL-02A
EMFE20010901