t.akustik ABSORBER Mounting Instructions page 3

ADJUSTING HEIGHT
Adjust the height of the absorber as you wish.
Fix the excess wire rope using cable straps.
Find more solutions for
your room on our website:
www.takustik.com
This product is intended to be used to optimise the room acoustics. Any other use or use un-
der other operating conditions is considered to be improper and may result in personal inju-
ry or property damage. No liability will be assumed for damages resulting from improper use.
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within
reach of babies and young children. Choking hazard!
Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
FIX THE ABSORBER TO
THE WIRE ROPES
Insert the hooks of the adjustable wire ropes into the
screw hooks of the absorber.
USING ABSORBER
Now you can use the absorber.
Share your installation
with us on Instagram:
www.takustik.com/instagram
For the transport and protective packaging, environmentally friendly materials have
been chosen that can be supplied to normal recycling. Ensure that plastic bags, pa-
ckaging, etc. are properly disposed of. Do not just dispose of these materials with
your normal household waste, but make sure that they are collected for recycling.
Please follow the notes and markings on the packaging.
Find more installation
guides on YouTube:
www.takustik.com/youtube
DocID: 522598_522600_522601_13.09.2021