Page 1
Owner’s Manual. We strongly recommend that you read the Owner’s Manual for complete details on how to install, configure and operate the AVR 230, as well as for the important safety information it contains. Figure 1 – Speaker Placement The colors shown for each speaker correspond to the matching output terminal connection on the back of the AVR 230 (see page 7).
Page 2
LINE IN/SUB/LFE SUBWOOFER FRONT RIGHT SPEAKER Step 2. Connect the speakers to the receiver: red (+) on speaker to colored (+) on receiver and black (–) to black (–). (See page 13.) Step 3. Connect the Subwoofer Pre-Out jack to the Line-In jack on your subwoofer (see page 13).
Page 3
Volume to –15dB. Hold the remote in front of you at shoulder level, and point it at the AVR 230. Press the SPL button for 3 seconds, and release it when the LED flashes amber. Press “5” or “7” to indicate the number of speakers.
Page 4
Optical Coax Device Connection Options : Recommended connections are shown in red, but connections may be made to best fit your system requirements. The Video 4 inputs are on the front panel of the receiver. Device Input Name Audio Input Connections...