Human Touch Perfect Chair PC-085 Replacing page 2

Hide thumbs Also See for Perfect Chair PC-085:

INSTALLING THE NEW ARMREST

1. Place the armrest into position and, if you are installing a left-hand armrest, connect the armrest cable to the electric recline cable.

2. Insert and hand-tighten the screws/washers that hold the armrest in place. NOTE: The smaller washer installs on each screw

before the larger washer.

CAUTION: Be careful not to drop the screws into the chair arm, as you will need to turn the chair upside-down to

retrieve the screws from inside the armrest.

3. Tighten all screws using a 4 mm (5/32") Allen Key.

Please send any questions or comments regarding these instructions to: documentation@humantouch.com

, LLC.

™