Avacom CARMAX Operating Manual page 3

AVACOM CARMAX
EN
Operating manual
Thank you for buying AVACOM CARMAX USB car charger. Before using the charger please
read the operating manual.
PACKAGE CONTENT
Charger
Operating manual
BASIC INFORMATION
AVACOM CARMAX charger can be connected via a USB connector. The charger provides
enough power to charge all demanding devices including smartphones, tablets or navigations.
Moreover, the Qualcomm Quick Charge 3.0 technology enables quick charging. This way of
charging can be used for devices supporting this technology. To charge your device by
Qualcomm Quick Charge 3.0 technology, use a networking cable. The connected device will
charge up significantly faster.
USE
Plug the charger in the cigarette lighter receptacle. The orange backlight of the USB connector
switches on - it indicates that the charger is ready to use. Connect a USB cable suitable for
charging your device to the USB output. AVACOM CARMAX charger is suitable for Apple
devices (iPad/iPhone/iPod), and also for smartphones with Android, Windows Phone and other
operating systems, for tablets, Power Banks, cameras, navigations etc. When connecting a
device supporting Qualcomm Quick Charge 3.0 technology, the intensity of the USB connector
backlight will slightly change.
SAFETY INSTRUCTIONS
Before using the charger please read the operating manual. If the charger is damaged due to
non-compliance with the operating manual the buyer is not entitled to warranty. The seller is not
responsible for any subsequent damage to property or injuries caused by the misapplication of
the charger or by not following the safety instructions. It is forbidden to dismantle the charger or
modify or adjust its properties. The charger can be used only inside by plugging it in a cigarette
lighter receptacle. Do not allow children to manipulate the charger and keep it away from them.
If the charger seems damaged, it is overheating or does not work properly stop using it and
contact your seller. Do not expose the charger to temperatures below 0 °C and above 40 °C and
to relative air humidity of more than 80 %. Keep the charger in a dry place.
RECYCLING
Once the charger is at the end of its life take it to a waste collection point for recycling. You can
find the recycling symbols on the product and its package.
TECHNICAL SPECIFICATION
Input: 12-24V
Output: 1x USB
5V/3A or QC 3.0 (3.6-6V/3A or 6.5-9V/2.5A or 9-12V/2A)
Made in China for AVACOM s.r.o.