Harman Kardon AVR 130 Brochure & Specs page 10

PA 2000
Multiroom/Multichannel Power Amplifier
Add remote rooms or additional channels to an existing
surround system with this high-current, bridgeable
amplifier. Fan-free for ultraquiet operation, the
PA 2000's design is optimized for the requirements
of the long signal paths found in multiroom systems.
PA 4000
Thanks to four bridgeable high-current amplifier pairs (a total of eight 45-watt channels) and two separate inputs, the PA 4000
is suited to a wide range of applications. Power two separate zones, or the back channels of a home theater and a remote zone
simultaneously with ease, while a variety of power control options such as Music Sense and a low-voltage trigger make operation
a breeze. For the ultimate in control, the KP 1 keypads may be used for remote power on/off and volume control, with the added
capability of using an optional IR sensor for total system control.
Multiroom enhancements.
house. Our AVR and DPR models (except AVR 130 and AVR 230) include a multizone system that feeds a separate source to a
second zone controlled by the standard Zone II remote and assignable rear-channel amplifiers. For more rooms and power, the
18
Multiroom/Multichannel Power Amplifier
It no longer takes a room full of gear to enjoy music throughout the
KP 1
In-Wall Keypad
The KP 1 powers up the PA 4000 and controls the volume in any room. Using Decora ® -style faceplates (not included) to blend
with any room décor, it may also control compatible Harman Kardon products when used with an optional IR sensor.
AB 1
Amplified In-Wall Module for A-BUS ® Applications
The innovative A-BUS system makes it incredibly easy to bring Harman Kardon sound to a remote room. Connected via a single cable,
the AB 1 powers most in-wall speakers from its internal amplifier with volume controlled by the up/down toggle or a Harman Kardon
remote. A built-in IR sensor completes the package, making it easier than ever to enjoy music throughout the house.
PA 4000 and PA 2000 drive the system, while A-BUS Ready operation uses a single cable to send power, control and audio to an
in-wall module that not only controls but also powers the system.
To view every model, visit
www.harmankardon.com
19