Cooking; Setting A Standing Time - Panasonic NN-SC678C Owner's Manual

Cooking

1
TURBO
DEFROST
If cooking at high power (10),
skip to step 2. Press POWER
LEVEL until the desired power
level appears in the display. PL10
is the highest and PL1 is the
lowest.
Press Power Level
once PL10 (HIGH)
twice PL9
3 times PL8
4 times PL7 (MED-HIGH)
5 times PL6 (MEDIUM)
6 times PL5
7 times PL4
8 times PL3 (MED-LOW)/
DEFROST
9 times PL2
10 times PL1 (LOW)
2
Set Cooking Time using the
Number pads. For all power
levels, the max. working time is
99 mitues,99 seconds.
Operation (continued)
3
Press START; the cooking will
start and the time will count
down in the display. At the
end of cooking, five beeps
will sound.
NOTES:
1. For reheating, use PL10 (HIGH)
for liquids, PL7 (MED-HIGH) for
most foods, and P6 (MEDIUM)
for dense foods.
2. For defrosting, use PL3
(MED-LOW).
DO NOT OVERCOOK: This
oven requires less time to cook
than older units. Overcooking
will cause food to dry out and
may cause a fire. A microwave
oven's cooking power tells
you the amount of microwave
power available for cooking.
Stage Cooking:
For more than one stage of
cooking, repeat steps 1 and
2 for each stage of cooking
before pressing
START . The
maximum number of stages
for cooking is three. When
operating, two beeps will
sound between each stage.
Five beeps will sound at the
end of the entire sequence.
Setting a Standing
Time
1
Some recipes call for a standing
time after cooking. To do this,
repeat steps 1 and 2 in the
Cooking section on the left.
Then press TIMER .
Note: Do not skip step 1, even use
high power PL10.
2
Set desired amount of stand
time using Number pads (up
to 99 minutes, 99 seconds).
3
Press START. The timer will
start and then beep twice at
the end of cooking time (the
beginning of standing time).
Five beeps will sound when
standing time is done.
10