Table of Contents
Advertisement
Before You Begin
Before you begin using your GPS-200/300, you will need to charge its battery
for a minimum of 6 hours.
1. For GPS-300 only, plug the included wall charger into a wall outlet. GPS-200
may be charged by connecting to your pc with the USB cable, by the 12V
car adapter or you may purchase an original wall adapter.
2. Use the included USB cable to connect the GPS-300's Mini USB
Connector/Charger port to the wall charger.
1.
After the battery has charged for at least 6 hours:
1. Make sure the L
OCK
2. Go outdoors to obtain GPS reception.
3. Hold down the ON/OFF button until the unit turns on.
1. Unlock
2. Go Outside
Switch
to Receive
GPS Signal
switch is in the
DOWN
g
2.
(unlocked) position.
3. Turn Power
ON
u
d i
e
+
l p
y a
™
GPS-200/300
Advertisement
Table of Contents
