SELKA ELECTRO sit-stand desk Quick Start

Quick start with
ELECTRO sit -stand desk
Your desk is equipped with an intuitive desk panel
designed for easy handling, and to help you stay active
throughout a working day. You can save your own
favourite sit-stand positions, get notifications of when
to stand up, pair your desk with the Desk Control™ App
and follow your personal statistics. Let's start!
Adjust desk
Reach out and gently push the entire panel – either up
or down – and have the desk move.
Store positions
Start by moving the desk to a position you want to
store. Press the 'star' button for 2 seconds. In the saving
process, the LED will flash twice. When the LED turns
into a static white light, your current position has been
stored and you can release the button.
Drive to stored positions
Push or tilt your desk panel – up or down – and hold the
pressure until the desk stops at your stored position.
Sit-stand reminders
Your desk panel includes a 'reminder' function – an LED
that shows you when it is time to stand:
• Green light: You are all balanced – no need to
move yet!
• Orange light: Raise your desk, it is time for you
to stand up!
Set a reminder
You get to decide how often you want to be reminded
to stand, and for how long. We have pre-configured
some intervals you can choose from. But, you can also
set your own.
Push it the 'bell' button in order to choose which of the
three intervals you prefer. The LED light intensity
indicates the chosen interval:
•
Interval 1 (weak LED intensity): 'Remind me
after 55 minutes of sitting'
•
Interval 2 (medium LED intensity): 'Remind
me after 50 minutes of sitting'
• Interval 3 (bright LED intensity): 'Remind me
after 45 minutes of sitting'
• Interval 4 (no light): 'Disable reminder'
Desk panel and control unit reset
Memory position reset
• Press and hold the 'star' button for 8 seconds
until the light has flashed red.
Reminder reset
• Press and hold the 'bell' button for 8 seconds
until the light has flashed red.
Desk panel factory reset
•
Press and hold the 'star' button and 'bell'
button for 8 seconds until the light has flashed
red.
Control unit basic setting reset
•
Push the panel down (in bottom position) and
keep the pressure on the button 6 seconds. At
certain error types this must be done twice.
Desk control app (free)
By using the Desk Control™ App you get friendly
reminders urge you to change position and extensive
statistics show you your daily achievements. Via the
app the desk can also be adjusted, and the user can
drive to pre-stored memory positions.
The app is available for three different platforms: iOS for
iPhones and iPads, Android for Android smartphones
and tablets, and a desktop version for Windows 10.
The Desk Control™ App can be dowloaded from iTunes
and Apple App store, Google Play store, and Microsoft
Store.
Pair with the Desk Control App (free)
Press the 'Bluetooth®' button for 2 seconds to enable
the pairing mode. The LED diode will flash blue. Open
the Desk Control App and look for your desk in the list
of "Desks nearby". Press 'connect' and you are ready to
start using the app.
See video instructions:
selkastore.eu/pages/how-to-use-electro
Electro troubleshooting codes