Settings
Change between °C and °F
The thermostat temperature display can be set to °C or
°F. The default is °C.
With the thermostat off, press the following sequence
of buttons: 'P', 'T', 'T' again, 'MODE'.
Restore factory default settings
With the thermostat off, press the following sequence
of buttons: 'P', 'T', 'T' again,
Teaching RF thermostat ID code to control unit
CAUTION:
The
thermostat
programmed with a unique code. Do not attempt to
teach the RF Thermostat ID code unless instructed by
the manufacturer.
With the thermostat off, press the following sequence
of buttons: 'P', 'T', 'T' again,
The LCD display will show 'CL' (Code Learn) for 2
seconds then return to the normal OFF state display.
During this time a special code will be transmitted by
the RF Thermostat to the Control Unit, causing the
Control Unit to learn its ID.
.
has
already
been
.
8
Millennium 8000 Series
Thermostat
1
Need help?
Do you have a question about the Millennium 8000 Series and is the answer not in the manual?
Questions and answers