Do you have a question about the GCM41504UK and is the answer not in the manual?
Questions and answers
Tammy Kahler
February 2, 2025
Just received my order from Amazon. Switched on machine to clean prior to use and now it’s not working at all. The lights are on and the time is set but it’s not switching on
1 comments:
Mr. Anderson
May 14, 2025
If your Geepas GCM41504UK machine is not switching on after initial setup, check the following:
1. Ensure the machine is properly plugged into a working power outlet. 2. Press the ON/OFF button. Its indicator should illuminate in red. 3. If the machine still does not switch on, confirm that the appliance is not damaged and that the power cord is not faulty. 4. If the issue continues, seek assistance from authorized service personnel as improper handling may result in fire, electric shock, or injury.
IMPORTANT SAFEGUARDS 13. To disconnect, turn any control to “Off”, When using electrical appliance. Basic safety remove plug from wall outlet. Always hold the p r e c a u t i o n s s h o u l d a l w a y s b e f o l l o w e d plug.
KNOW YOUR DIGITAL COFFEE MAKER involved. Children shall not play with the appliance. Cleaning and user maintenance s h a l l n o t b e m a d e b y c h i l d r e n w i t h o u t supervision.
BEFORE THE FIRST USE Note: You can take out the carafe, pour and serve at any Check that all accessories are complete and the unit is not time. The appliance will stop dripping automatically. But the damaged. Fill water into water tank to the MAX level and brew time cannot exceed 30 seconds.
Note: You may cancel the automatic start function by 1. Fill the tank with water and descaler to the max level as pressing ON/OFF. If you want to change the automatic indicated on water gauge (the scale of water and descaler is start time, only following the above 2-4 steps again.
Need help?
Do you have a question about the GCM41504UK and is the answer not in the manual?
Questions and answers
Just received my order from Amazon. Switched on machine to clean prior to use and now it’s not working at all. The lights are on and the time is set but it’s not switching on
If your Geepas GCM41504UK machine is not switching on after initial setup, check the following:
1. Ensure the machine is properly plugged into a working power outlet.
2. Press the ON/OFF button. Its indicator should illuminate in red.
3. If the machine still does not switch on, confirm that the appliance is not damaged and that the power cord is not faulty.
4. If the issue continues, seek assistance from authorized service personnel as improper handling may result in fire, electric shock, or injury.
Do not attempt to repair it yourself.
This answer is automatically generated