Operation Of Controls - Daniela DAN9DD User Manual

OPERATION OF CONTROLS

Low Medium
speed speed
1. Connect to electricity, touch the power switch, all the button show in white light,
the range hood is ready to work.
2. When the range hood is ready to work(all button show white light), touch the low speed
control, the panel start to go up. The screen show "0P". When it reach the top, the screen
show" F1" and the motor start to work. The low speed button show in blue light. Touch the
low speed again, the motor stop working and the panel start to go down. Same operation
to Medium and High speed.
3. When the range hood is read to work. Turn on the light by touching the lamp switch.
The symbol show in blue light. Turn off the light by touching lamp switch again.
4. Time setting. Long press the power switch 3 seconds, the range hood is in the status of
clock setting. Setting the hour by lamp switch and the minutes by UP & Down switch. The
time shows from 00:00 to 23:59. The range hood back to stand-by status if there is no
further setting operation in 10 seconds.
5. Timer. When the motor is working, press the power switch one time, the screen shows
00:60. It means the range hood and lights will be stop working in 60 seconds. Press the
power switch one more time, the range hood and lights stop working right away.
6. Up & Down Switch For manually cleaning, long press the Up & Down Switch 3 seconds,
the push bar will be opened and in manually cleaning status. The wind door will be opened
but the motor is not able to work. Some cleaning job can be done according to the actual
need. For urgent usage, when the range hoods are going down or going up, long press
(3 seconds) this switch, the panel can change its original path and go opposite way. For
example, the panel is going down and you wish it going up, long press Up and Down
Switch, the panel change to going up.
PA G E 1 4
P I 02 9604 1226
High
speed
E I sales@danielaappliances.com.au
Lamp Up & Power
switch down switch
W | danielaappliances.com.au