Samsung WA50B5100 Series User Manual page 45

Troubleshooting
Checkpoints
If you encounter a problem with the washer, first check the table below and try the suggestions.
Problem
Does not turn on.
Does not start.
Water is not supplied.
Untitled-1 45
• Make sure your home electrical system is providing electrical power that
matches the requirements of the washer. See page 15.
• Make sure the power cord is completely plugged in.
• Check the fuse or reset the circuit breaker.
• Make sure the door is closed.
• Make sure the water taps are open.
• Make sure to press or tap START/PAUSE to start the washing machine.
• Make sure Child Lock is not activated.
• Before the washing machine starts to fill, it will make a series of clicking
noises to check the door lock, and then does a quick drain.
• Was the door opened during the spinning cycle? Close the door, and then
press or tap START/PAUSE to resume.
• The machine has entered Standby, has paused, or is in a soaking cycle.
Please wait.
• Check the fuse or reset the circuit breaker.
• Make sure you press or tap START/PAUSE after selecting the cycle and
options.
• Make sure the water taps are open.
• Are the mesh filters in the water inlets clogged? Clean the mesh filters by
brushing with a toothbrush. See page 42.
• Is the water supply cut off? If the water supply is cut off, close the tap and
power off.
• Straighten the water supply hoses.
• Open and close the door, and then press or tap START/PAUSE.
• If the water pressure is low, it takes longer to start washing.
• If the water level is not as high as necessary or lower than expected, use
the Deep Fill function to adjust the water level.
• Make sure the hoses are connected to the correct water taps.
Action
English 45
2022-05-13 11:31:48