Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for GW Security 3088IP
- Page 1 3MP IP License Plate Capture Camera Operation Guiding...
-
Page 2: Table Of Contents
Content 1 Overview...................................3 1.1 Product Introduction............................3 2 Product Structure..............................3 2.1 Product Dimension............................3 2.2 Product Cables............................3 3 Product Installation..............................4 3.1 Installation method............................4 4 Product Settings & Adjustments...........................5 4.1 Log in Web Page:............................5 4.2 Zoom & Focus Adjustment.........................6 4.3 Image color Parameters Adjustment......................6 4.4 Image &... -
Page 3: Overview
1 Overview 1.1 Product Introduction This product is called network license plate capture camera Customers can use NVR,VMS or Web to do capturing on plate number. 1.2 Product features Capture speed reach up to 90km/h Frame rate maximum 60fps/s ... -
Page 4: Product Installation
3 Product Installation 3.1 Installation method a. Recommended installation height: ~1.5M (5’) above ground; b. Recommended Vertical angle between camera lens and plate number: 38 10° ; ° ~ Recommended Horizontal angle between camera lens and plate number: 35 ° - 8°. Best installation angle is 15°-35°... -
Page 5: Product Settings & Adjustments
4 Product Settings & Adjustments 4.1 How to Log into the Web Interface: Step 1 Use “GW Device Manager” to find the camera on the network. (The software is located in the CD included in the package). After successfully install and execute the software, you will see the interface like the picture shown below. -
Page 6: Zoom & Focus Adjustment
Note: IPC address must be same network segment as your PC. If they are in a different network segment, please use “Device Manager” to modify the address of IPC. 4.2 Zoom & Focus Adjustment Step 1 Click in the “Preview” page; Step 2 Click next to ZOOM to the targeted place, then click next to FOCUS... -
Page 7: Image & Other Parameters Adjustment
Detailed parameter descriptions： Items Explanation Default value 50, 0-100 optional; adjust the video color. Higher value results in reddish picture. Lowering the value results in greenish picture. Brightness Default value 28, 0-100 optional; adjust the overall video brightness Default value 25, 0-100 optional; adjust the overall lightness and darkness of the Contrast image. - Page 8 Items Explanation Default value Disable; This function will decrease image noise, but may cause motion 3D DNR trailing images. Default value Disable; Please DO NOT use this function for license plate capture Dewarping camera. Exposure Mode Default value Auto; Setting it to manual mode enable shutter speed adjustment. BLC Mode Default value Disable;...
-
Page 9: Common Problems
5 Common Problems Common Problems Solutions Possible Reasons： Camera is not receiving power Incorrect power supply; voltage/amperage Faulty network cable Cannot find camera on Camera is in different physical network the network. Solutions： 1. Power up camera using correct power supply (DC 12V 2A); 2. - Page 10 1. Try to make contrast and brightness value as default. 2. Adjust lens Possible Reasons： LED off / video too dark/ Overexposed Distance too far (2-15M) Can not see plate number clearly Solutions： 1. Check LUX value on IE page; Check Led intensity value 2.
Need help?
Do you have a question about the 3088IP and is the answer not in the manual?
Questions and answers