Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for STL MEGA S-MG100
- Page 1 MEGA ® SIREN S-MG100 INSTRUCTION MANUAL SpeedTech Lights, Inc © 2019...
- Page 2 This document must be delivered to and read by the end user and installer as it serves to provide you with the required information for proper and safe use of your STL product. Before operating this or any STL products the user and installer must read this manual all the way through. You will find important information in this manual that could prevent property damage and/or serious injury to the user and installer.
- Page 3 Grommets, cable ties, looms, and other installation hardware should be used to anchor and protect all wiring. Fuses should be properly sized and located as close to the power take off points as possible to protect the wiring and device. To protect against short circuits, a fuse is included by STL for all products.
- Page 4 MEGA ® SIREN Wiring Harness Diagram Wire Color Function Positive Red* Negative Black* Primary Speaker Brown Primary Speaker Brown * Indicates a main power cable. Specifications Ohms 11 Ω Cable Length 6’ Mega Operation Power/Volume Knob: • Rotate clockwise until a click is heard to power On the unit. •...
- Page 5 2. Take the other Brown cable and connect it to the other Speaker cable. Connecting Vibe Low-Frequency Siren (Sold Separately) For installation instructions for the STL Vibe, please visit the Vibe instruction manual link listed below: https://www.speedtechlights.com/files/instructions/39030STL%20Vibe.pdf All rights reserved. No part of this Instruction Manual may be reproduced, distributed, transmitted, or otherwise shared in any form or by any means, including but not limited to All rights reserved.
Need help?
Do you have a question about the MEGA S-MG100 and is the answer not in the manual?
Questions and answers